Casio Retail Supplies - Page 2 - Recent Questions, Troubleshooting & Support
Sharp xe-a20s locked up
Hi.
Yes you are right. you have logged yourself out of the machine. it is telling you to log back in.
Press 1 then CLK# or CASH#
Mark
I have a Casio TE-2400 and I need to change its
You can use English, French, Spanish, or German on this model, but you have to fully clear the machine and lose all settings because it can only be done at the start of programming. If this is a new machine out of the box, then no problem. If it has programming already, then you should back it up first. If you need the code, let me know
Just purchased a casio PCR T2100 cash register,
1. Turn key to program
2. press 2 subtotal
3. press 132 subtotal
4. enter commercial message using alphabet keys on keyboard (21 character max per line, 4 lines)
5. press cash at end of each line.
6. press subtotal when done
7. turn key back to reg
Error code Eo2
HI.
Error 2 means no clerk code entered. You need to log on to the machine with your clerk (PIN) number, then press the CLERK or CLK# button. Then it will let you make sales.
If you have trouble, just let me know.
Mark
Casio TE-4500F cash register scaning problem
There are several things you will need to do. In the I/O program you must tell it where and how the scanner is set up and then you will have to program the scanner itself. I know this will solve it. I need to know the make and model of scanner
I have a casio te-400f
Hi. It only happens when a function is not complete in another mode, so it will definitely be waiting for completion of last function. Since you don't know what it was, you can flag clear it to jump back to REG mode:Turn key to PROGRAM mode.Turn power off at wall.Hold RECEIPT FEED down - keep your finger on it.Turn power on at wall.Wait 5 seconds, then let go of RECEIPT FEED.You should see "FFFFFFFFFF" on display.Press SUBTOTAL.wait for printout.Turn key back to REG mode.Note: You may have to sign back on (clerk buttons)---------------------------------------------------------------------------If anyone needs more information, the Casio TE-4000f manual is here:
http://the-checkout-tech.com/manuals/cashregisters/Casio5.php
E004 Error INIT/FC
You need to finish the flag clear.
Turn key to PROGRAM mode.
Turn power off at wall.
Hold RECEIPT FEED down - keep your finger on it.
Turn power on at wall.
Wait 5 seconds, then let go of RECEIPT FEED.
You should see "FFFFFFFFFF" on display.
Press SUBTOTAL.
Wait for print out.
Turn back to REG mode (you may need to sign back on)
Casio pcr-t2000A - programming receipt
That just turns the logo on or off. If there is an old logo there, you don't need to do the 2122 command.
to change the name on most Casio machines:
Turn key to Program mode
2 SUBTOTAL
132 SUBTOTAL
Now type the characters for the first line of the receipt using the alphabet on the edge of the buttons. If someone has removed the letters from the keys, just find the alphbet layout in your manual.
00 (double zero button)
CASH (maybe labelled CA/AT)
232 SUBTOTAL
Now type characters for second line
00
CASH
332 SUBTOTAL
Now type characters for third line
00
CASH
432 SUBTOTAL
Now type characters for fourth line
00
CASH
SUBTOTAL
NOTE: You might have to do 2 receipt prints in REG mode to see the changes
-----------------------------------------------------------------------
If anyone is looking for / needs a Casio PCR-T2000 manual,
http://the-checkout-tech.com/manuals/cashregisters/Casio2.php
How to connect pc to casio se-c6000 cash register
Question is how to connect PC with Casio SE-C6000 Cash Register. Answer is very easy and simple. This ECR is POS system and has capability of FTP . Download any FTP software from net. Go to ECR program 3 . Press 798 and sub Total Key. enter local network area unique IP address for this ECR starting with 192.168.1.10 as( 192168001010) an example and must be not conflicting and within the range of local area IP Adresses. then press CA/Amt. Key. then 255255255000 for sub mask and press CA/Amt Key again..Then 192168001254 as gate way then press CA/amt Key again and sub Total Key to finalize. Connect PC with network cable in RJ45 slot on ECR. Turn the mode key on Reg Mode for normal operation. Now on FTP software which is already installed on your PC open and put host ID IP address of your ECR. User Name is "SCTHRD" and Password is : "OTTFFSSENT" then Enter . You will see all program of ECR in folders. I hope it will help your need . Ibrahim Azhar
I can't sign in under my clerk ID!
Have you tried every other id? If so, you could try a flag clear (see the manual for procedure) which usually loads a clerk in order to allow programming while in program mode. Then you can edit clerk file again. Good luck
Have tried everything to get rid of E01 but nothing works ..!PCR-T290
You turned the key before you finished in another mode. The register is telling you to go back and finish what you started. For those of you with this problem, turn the key until you find a mode that doesn't give the error. This is the mode that you started working in but didn't finish. Now press subtotal. now press cash. You will have finished anything you started so now you can turn the key. you're welcome.
Not finding what you are looking for?