Casio Retail Supplies - Answered Questions & Fixed Issues

You have programmed the Cash key in P1 mode to 71 cents. To reverse this turn key to program enter a clerk if needed and put 00000000 hit Cash key then Subtotal turn key back reg.

Which model number do you have?

Question edited for clarity and add Maker. Question moved from Cars and Trucks Category. You can program the Shop Name, but not item names just prices. https://www.google.com/search?q=add+product+Names+to+the+receipt+of+a+SE-C2000+till ..

If an IBM Toshiba SurePOS 4852-580 15 cash register that you purchased used is not allowing you to make any changes and says "unauthorized," there could be a few possible causes:

1. The cash register may be locked by a previous owner: The cash register may have been locked by the previous owner with a supervisor password. You will need to obtain the password to make changes.
2. The software may be outdated: The software may be out of date and require an update. You will need to contact IBM for assistance with this.
3. The system may have been tampered with: The cash register may have been tampered with, which could have caused the system to become locked and require a service technician to reset it.
4. The cash register may have a security feature enabled: Some IBM Toshiba SurePOS have a security feature that allows only authorized users to make changes. You will need to contact IBM for assistance with this.
5. The cash register may have an issue on the hardware: some issue on the hardware of the device could be preventing the device from functioning properly.

There isn't one available. User Manual and Programming Manual only. There are sites that SAY they have it but don't. This search query forces results that mention this model. https://www.google.com/search?q=Casio+%22TK-2300%22+Service+Manual ..

Hi. You don't want to reset it unless you have to, as this will mean a lot of extra work for you. Better to find out why it won't let you program it.

First of all, do this:

Turn the power off at the wall
Turn the key to PROGRAM
Now keep your finger on the RECEIPT FEED button while you turn the power back on, and keep holding it down for 5 seconds.
Let go, and you should see "FFFFFFFFF" on the display
Press SUBTOTAL
Wait for print out.

On the print out, near the bottom, you should see "FC" on the left, and then a number on the right.
Tell me what that number is, and I can help you further.

Question edited for clarity. Question moved to Casio Point of Sale. Currency Programming. One article says Pounds and Euro, and the other says Euro and Local. https://www.google.com/search?q=casio+se-g1+program+currency ..

Hi.
Register keys are different from most other keys, so you can't get them made. You need to find a dealer in your area.

Mark

Make sure the paper is the correct width. Does it print or advance if you try to print a daily report?

https://elektrotanya.com/casio_pcrt2000_electronic_cash_register_sm.pdf/download.html

Model number?

Hi.
Yes you are right. you have logged yourself out of the machine. it is telling you to log back in.

Press 1 then CLK# or CASH#

Mark

You can use English, French, Spanish, or German on this model, but you have to fully clear the machine and lose all settings because it can only be done at the start of programming. If this is a new machine out of the box, then no problem. If it has programming already, then you should back it up first. If you need the code, let me know

I am pretty good at guessing 'Mystery' items, so I have changed your category. That is where my Clairvoyance ends. Google make model manual They are ALL online, especially all the Casio Cash Registers. The Casio site is excellent.

Well done. Learning init settings can be tricky on some models. The main thing is replacing the batteries to stop it from happening again

Don't know where NZTech was or the post but you need to press the CLK# button on the cash register(third key from left on cash register keyboard at top menu, Receipt on/off then CLK# ) and sign in the clerk. if you have no clerks setup you may have to set up clerk check user manual https://manualzz.com/doc/3075262/casio-te-2400-user-s-manual click on download pdf right hand side of screen page 86 programming clerk

HI.
Error 2 means no clerk code entered. You need to log on to the machine with your clerk (PIN) number, then press the CLERK or CLK# button. Then it will let you make sales.

If you have trouble, just let me know.

Mark

You need to finish the flag clear.
Turn key to PROGRAM mode. Turn power off at wall. Hold RECEIPT FEED down - keep your finger on it. Turn power on at wall. Wait 5 seconds, then let go of RECEIPT FEED. You should see "FFFFFFFFFF" on display. Press SUBTOTAL. Wait for print out. Turn back to REG mode (you may need to sign back on)

Key to X1/Z1 mode then press decimal point. Then press TL (cash).------------If anyone needs a Sharp XE-A303 manual, one of the users has it here: http://the-checkout-tech.com/manuals/cashregisters/Sharp13.php

That just turns the logo on or off. If there is an old logo there, you don't need to do the 2122 command.
to change the name on most Casio machines:
Turn key to Program mode 2 SUBTOTAL 132 SUBTOTAL Now type the characters for the first line of the receipt using the alphabet on the edge of the buttons. If someone has removed the letters from the keys, just find the alphbet layout in your manual. 00 (double zero button) CASH (maybe labelled CA/AT) 232 SUBTOTAL Now type characters for second line 00 CASH 332 SUBTOTAL Now type characters for third line 00 CASH 432 SUBTOTAL Now type characters for fourth line 00 CASH SUBTOTAL
NOTE: You might have to do 2 receipt prints in REG mode to see the changes
-----------------------------------------------------------------------
If anyone is looking for / needs a Casio PCR-T2000 manual,
http://the-checkout-tech.com/manuals/cashregisters/Casio2.php