Questions & Answers for: vacuum belt keep coming

VACUUM MODEL U6454-900 BELT KEEPS COMING OFF Have you put on a new belt or just keep using the old one. If you haven't replaced it in the last 6 months, then it has stretched to the point where it won

Ad

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

1 Answer

...vacuum and replaced with new brush roller and belt but it keeps kicking belt off the spindle there is nothing to hold it on Is there suppose to be didn?t see any broken pieces inside it. Anita Hello, ...

Ad

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

1 Answer

Belt keeps coming off As soon as I start the vacume, belt comes off. Bought a new belt, still comes off. Are all windtunnel belts same for all models? Great. Glad to help. If you would, take a moment ...

Question about S3765-040 WindTunnel Bagless Canister Vacuum

2 Answers

...belt keeps coming off & it is the correct size. Great vacuum but it is a pain to keep taking it apart & putting the belt back on. Any suggestions? I have the same problem with my Hoover Wind Tunnel. ...

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

2 Answers

...vacuum cleaner. there is a certain way the brush roller goes in ,if you have one side right and the other wrong the belt will keep coming off.clean the rubber of the motor shaft before replacing the ...

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

1 Answer

...Misaligned pulley on brush or idler pulley on 2 belt unit Misaligned motor.. this is rare Put in a fresh matching genuine belt and keep a spare handy. Belts stretch and slip long before they ...

Question about Featherlite Bagless Vacuum M085845Vacuum

1 Answer

belt keeps coming off I bought a Dirt Devil Featherlite last year. The belt keeps coming off. I thought it was time for a new belt so I bought new ones. The same thing is happening. After about one ...

Question about XL Ultra Bagged Upright Vacuum

1 Answer

belt is slipping off the shaft.Solution - check see if roller turns easily by hand if not change the bearings.3. THe motor has twisted in its body due to cracked housing or worn rubber seats.Solution-

Question about Elite Rewind Pet Bagless Upright, UH71003

1 Answer

...belt has come undone twice, and I haven't managed to vacuum an entire room yet. Those machines come half way across the world. The belt stretches while it waits. Buy a new belt for it and ...

Question about Elite Rewind Pet Bagless Upright, UH71003

1 Answer

...coming off. I've replaced the belt 2 times, checked my brush for hair, nothing but it keeps coming off. Question edited for clarity and typos. Did you 'replace the belt 2 times' with a new one? If ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Anonymous

Level 3 Expert

43501 Answers

Are you a Vacuums Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...