Questions & Answers for: spa heater

heater for spa. When turn on the Spa button, all water drains thru filters/pumps in to the pool. How do I turn this function off and just turn spa filter on as well as spa heater on. Here is a link to

spa heater the water temperature is about 60 degrees. The heater warms the spa fine until the water temperature reaches about 94 degrees. At this point the heater flame shuts off for a couple minutes.

...spa heater Yes, these pool heaters are designed for use with a spa. They are made to accommodate temperatures for both a pool and a spa running off of the same heater. Check the owners manual for ...

...spa, the heater shuts off at about 91 degrees and gives the high temperature message on the heater. Did the pool guy mess up? How should I fix it? if a 3 wire system put pool at temp desired and spa ...

...Spa Heater Els1102-2. I turn the heater switch on the light comes on, But it wont heat the spa. if pump circulation ok check pressure switch if ok check heater element or ignitor or safety ...

...keep the pool at 85F with this hot water overflowing constanly turn to spa mode should shut off flow to pool then enable spa heater it should heat up if not check to see if heater on spa is turned ...

...spa heater.i bought spa heater it just has been three days.my spa is only 1 meter x 1 meter and dep is 1.2 ft. it is located outside of my house and 50meter far from sea and 10 meter above the hill ...

...spa heater on the pool heater starts banging and shuts off-all valves are working need more info is this dual equipment if so turn the pool heater off when in spa mode also do the opposite when in ...

...Otherwise: Heater on what? Stand alone heater on a pool? Heater on a spa... Separate equipment or is it on a portable spa (equipment within the spa cabinet)? If portable spa, what is Make &

...spa heater with Jandy PDA? To turn on Spa heater do I need to turn on Spa Mode and and Spa Heater, and turn off Pool Mode? normal running is pool mode turn to spa mode then enable spa heat it should ...