Questions & Answers for: sound to cable

Question about LN-R328W 32 in. HD-Ready LCD Television

1 Answer

...Cable Box, The HDMI sound has to be selected in order to get sound using the HDMI cable. Hoping that all other settings are ok, You may need a new signal board. Part Number BN94-00629R. Average Cost ...

Ad

Question about 53UDX10B 53" Rear Projection Television

1 Answer

...cable box to surround sound unit, then componet cables (rgb) from surround sound box to the TV. No audio cables are being used. when I play normal TV, I only get sound from the TV speakers, not the ...

Ad

Question about DAV-HDX500 System

2 Answers

sound or cable sound to go through the speaker system was wrong (or, at least, it didn't work for me). So, here's what I did. I connected Component video cables (Y/Pb/Pr out) from the Cable box to the

Question about D52W15 TV

1 Answer

sound using a five cable set that is supposed to pick up video as well as sound. Any thoughts? George sounds like you are using componant cables.[ red,blue,green on the right side in back of the cable

...Sound and Cable Box, and use RGB cable or HDMI to go from Cable box to TV! If your Surround Sound has no HDMI, use a Fibre Optic to go Cable to Surround. It will work Great! Good Luck! read this ...

sound through the HDMI cable, which is not always supported on your cable box, or pc or whatever. Check your manuals. You can use the component (the 3 colored video connections) with the red and white

Question about HDLCD-1900 19 in. LCD Television

1 Answer

...sound bar to your cable box/satellite tv receiver. If you are connecting with composite or component cables you connect the video cables (either the yellow or the green blue and red cables) between ...

...cable and get sound out of one of the devices you've connected to the Sharp television with an hdmi cable. You will then be directed by the customer service rep to connect all your devices to the ...

Question about 42LC2D 42 in. LCD HDTV

1 Answer

sound from cable Can get sound when using DVD but cannot get sound from cab,e tv or cable DVR 1. check cables correctly hooked. 2. If you mix the video and audio cables, you wont get sound. 3 So audio

Question about LN32A330 32 in. LCD TV

1 Answer

...cable box, sound on analog channels fine, but when tuned to digital channel (3.1, 10.1, 13.1 etc) sound works fine for a few seconds then starts going robotic and unintelligible. you either have to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...