Questions & Answers for: skips channels after scan

...channels that I get. I've done the auto channel scan but this hasn't help. What the hell do I need to do to get this to work. Thanks. Hi. Check in the tuning or preset menu that all the channels you ...

cant turn the tv to channel 3 The tv needs to be on channel 3 for the comcast cable to work, the tv goes from channel 2 to channel 4 skipping channel 3 and we cant seem to get it back. The tv is an ...

...channels. WA#2 = after a channel scan, go to the skip channel section of the menu, and if your remote has the colored buttons on the bottom scroll through the channels using the red and green (up and ...

...channels set to scan marked with an "√". You can delete channels from the scan by removing the "√". If any channels were missed during auto tuner setup and you wish to add them, ...

...channels 1 to 10 run a scan on your tv through the menu to search channels. it will auto pick up any channels you dont have. also you can go to oyur channels and edit the channels you want to skip. ...

scan for channels need to know if a cable box is used. If using the built in converter there are more than 1 positions that can be selected. On one setting some channels are omitted. A channel scan is

...skips channel 4 You have to go back to the setup screen and scan for channels. Then you need to have a signal present for channel 4 so that the scan finds that channel. Note that if it is a unit that ...

I don't want to run a channel scan. I have no channels, only want the tv for the dvd capabilities. How do I skip this? Just END / CANCEL the scan after the scan has started. That should be an option.

...scan channels with antenna. screen comes up but not sure what to de next. need the manual but cant find it on line after it scans here is what the screen looks like channel skip skip 2 off yes when I ...

...skips over the Channel option. I can't select Channels to perform a rescan. What's wrong? What must I do/fix/change in Settings to again be able to select the Channel option, so I can scan for ...