Questions & Answers for: simple fuse 5 amp

Question about 42H81 42" Rear Projection Television

2 Answers

simple fix. Very common problems with this TV set. Toshiba even has a technical bulliten on this and several other models of tV set. The negitve terminal of C809 and C810 need to be soldered, as there

Ad

Question about 60PP9202 60" Rear Projection HDTV-Ready Television

1 Answer

no pic, I mean could it really be that simple, I tried a lower amp fuse but it did not work, It could be, but usually something else has caused the fuse to blow. What is the chassis number to your set

Ad

Question about 2500 PSI Pressure Washer

1 Answer

...simple a fix as " The Fuse Has Blown " Check the fuse in the plug, and it,s Rating. I,d assume this should be rated at 13 AMPs. If the fuse is 3-5 amps it,s under-rated. You should get it tested out ...

Question about 1998 Expedition

1 Answer

...simple solution for this problem? A fuse I'm missing? The switch itself? It seems like it's electronic in nature rather than mechanical. Possibly related - maybe not: The heater has stopped blowing ...

Question about Go Go Ultra X 3 Wheel

1 Answer

fuse to blow? The simple answer is that the two 12 Amp hour batteries in the go go are probably old and weak. This causes the charger to work too hard and the circuit to overheat and the fuse to blow.

fuse and after a minute go touch the negative lead on you battery if the cable is really hot then there's a short in the circuit or in the case of your ac it would be a broken resistor. http://www

Question about 1996 Mustang

1 Answer

...simple sum: Watts divided by Volts = Amps Therefore example calculations look like this: If you have a 500 watt appliance on a 240 volt system 500/240 = 2.083 so use a 3 amp fuse An appliance with a ...

simple solution to try is th switch the vehicle off, go to the fuse box on the right hand panel of the boot (as your facing boot) remove fuse 24 (5 amp) for 5 minutes then replace and start vehicle as

Question about 2010 Partner Grand

1 Answer

...fuse but not uniquely. nice guess, would you like to do simple tests, and not guess. sure. then you need a voltmeter (DMM) got one? here are the simple tests. (it dont cover immobilisers as that is ...

Question about 2010 Partner Grand

0 Answer

...fuse locations may differ, if you have a test light, just simple, check all the fuses. Check the attached links,instruction and guides, Good luck "I hope this helped you out, if so let me know by ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...