...scart socket on vcr. Vcr scart marked tv plug scart from here to scart 2 on tv If you have 3 scart sockets on tv you can connect dvd using scart to scart socket 3 on tv. If Tv has only 1 scart the ...
scart socket on the TV labled AV1 or 1 The scart labled VCR goes to scart socket on VCR labled AV or IN Now the aerial leads From wall socket to ANT in on freeview. Then from RF out on freeview to ANT
...scart socket at the back of the tv but have bought a scart adaptor to solve this problem. I cannot get my dvd to work though freeview works through the tv (av) channel. If your freeview has two scart ...
...Scart Socket, it may have a Composite socket (Yellow) and an Analog Audio input (Red and White). You can buy a Scart to Phono lead suitable for the job easily. HDMI is no use to you with video. Get a ...
...scart socket on the tv then...Put a scart lead in the one marked tv on the box and plug it into the tv,then from av1 on your dvd take a scart and plug into the other socket on the box.If you cannot ...
...scart socket and the VCR has too. Use a fully wired lead. If the TV has only one scart socket and you have another device connected to it, such as a DVD player, then get a scart switching box. This ...
...scart socket 2 is 2way. set the recorder as you would normally but set the channel to tye av or scart that you are using. please note that video plus will not work on the scart socket. you may also ...
Question about DVP-NS50P DVD Player
...scart socket. This is necessary for a deaf person's loop. Whatnismthe solution Our new tv does not have a scart socket. This is necessary for a deaf person's loop. Whatnismthe solution ...
on the TV to the TV SCART socket on the Sky Box. Connect another SCART lead from the AV2 socket on the TV to the AV1 socket on the DVD player and an RF cable from VCR to the aerial in socket on the TV
Question about DVP-NS50P DVD Player
...SCART" socket on the back of the satellite receiver, then plug the other end into the "INPUT" scart on the back of the VCR. Take one end of the second scart lead and plug it into the "OUTPUT" socket ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
