Questions & Answers for: Canon PIXMA rubber become sticky

Question about PIXMA MP210 Photo All-In-One Printer

3 Answers

...rubber will become very shiny with wear. So instead of feeding the paper they slip like a car on ice. The printer not knowing prints anyway and wastes your expensive ink. Solution: Scuff the paper ...

Ad

Question about PIXMA MP750 All-In-One InkJet Printer

1 Answer

...rubber (that which turns to pull the paper out) has become slippery due to coating used in many papers. Try to clean them out using a mild household detergent. Of course, this should be done with the ...

Ad

Question about PIXMA iP1800 InkJet Photo Printer

1 Answer

rubber rollers that grab the paper become glazed and will not pick the paper up. Also, the feed mechanism may have just worn out. If this is an older printer, it might need to be replaced if you can't

Question about PIXMA MP160 All-In-One InkJet Printer

2 Answers

...become fouled with paper fibers that insulate the rubber from the driven sheet. Cleaning the rollers (on most, some disassembly required) may cure both problems but if you have ever done labels with ...

Question about PIXMA iP1800 InkJet Photo Printer

1 Answer

...I would check the paper guides on the paper stand, then check the path, turn it upside down and look for debris, I once found my childs sticky sweet in mine. Then try to clean any rubber

Question about PIXMA MX870 Wireless Office All-in-One InkJet Printer

1 Answer

...rubber creases paper causing it to jam It seems to be fault in the transport of the paper in the rollers which can be bad or has some sticky substance .If you have used any adhesive sticker printing, ...

Question about Pixma iP2600 InkJet Photo Printer

1 Answer

when I hit print when the paper starts to feed the pushbar paper feed does so fast causing the paper to start slightly off caqusing a paper jam.. Is there anyway to adjust the feed When the paper does

Question about Pixma iP2600 Photo InkJet Printer

1 Answer

I cant get the paper to feed without jaming is ther a way to adjust the feed When the paper does not feed straight, dirty or sticky rollers can cause it to jamb or crinkle, also failure to remove all ...

Question about PIXMA iP3500 Printer

1 Answer

...rubber holders with a pair of tweezers or long nose pliers and then rinse in running water (no detergent necessary). They will soon become clean and white again. Do not twist to wring out the water, ...

...rubber' rollers, which eventually become slippery and won't grip the paper. The answer is to wipe the rubber drive wheels with a damp cloth, maybe with some dish wash type detergent. If that fails, ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...