Questions & Answers for: rca phone saying plug line Music

...RCA ) plugs from the turntable to balanced ( 1/4" T-R-S ) plugs to connect to your MPC1000's stereo line inputs. If your turntables have magnetic cartridges, you will need an active phone preamp, ...

...the line in jack using a stereo RCA to 1/8" stereo plug cord with !/4" adapters on the RCA plugs. Then run from the !/4" left and right output jacks on your D5 to the !/8" line in on your sound

RCA) jacks, not "phone jacks" of which the current usage is normally the 1/4 inch diameter. You would be going INTO the Berhinger 1/4 inch jacks on the back of the speakers since you are not using the

...RCA plug on one end and a XLR plug on the other. The XLR plugs are wired so that they are unbalanced. Pin one is ground and pins two and three are soldered to the positive. I used shielded cable and ...

...or do i need a converter or mixer of some sort? Yeah, you can plug right in. Like you said, just do 1/8 inch out of the head phone jack to RCA into the AP15. All good! GO TO E-BAY THEY MAY HELP

...plug in the cord in :.....line in or line out?????? You will use microphone with balanced XLR connector into the XLR mic input. Note, the ALpha does NOT have phantom power so you cannot use condenser ...

...that split into two RCA plugs. Go from the headphone out of the DR1 to the CD inout jacks on the mixer. Then with the second cable go from teh CD out jacks of the mixer to the line in of the

RCA jack and plug. FIRST thing though is to get everything powered from the same source. Using multiple plugs at different points within a building is ASKING for these problems and also to damage your

...phone out puts. No sound. RCA is red to red and white to white. In master and tried in recrd lines as well. NO SOUND OUT PUT? WHAT AM I DOIN WRONG or os things thing BROKE? your RCA from your mixers ...

...phone plug to stereo male RCA plugs. You plug into your computer headphone jack, plug the RCA plugs into the "Tape In" jacks on the head. Radio Shack, Best Buy, Wal-Mart, all have these cables. You ...