Questions & Answers for: Jeep position light

light position? I have checked all grounds, and like I said, it will work the running lights if you pull the switch out slowly, but not in the normal position. Right before the normal position for the

Ad

Question about 1996 Grand Cherokee

1 Answer

...light, it probably needs reset. What you do is take the positive cable off the battery, lay it aside so it doesn't touch the terminal, go inside your vehicle and turn the ignition on and completely ...

Ad

...position. If it isn't, you need a new one! The alternator or coil positive contacts are good places to check for juice! You can use a test light and watch the light go on and off. Good luck and be ...

...light switch in the wrong position as there usually is 3 positions, 1. lights come on when door is opened or light off when closed, 2. light remains off even when the door is opened. 3. light is on ...

Question about 2001 Cherokee

1 Answer

...the switch and balance between parking light position and off I can get dash lights and parking lights to come on. Any suggestions? light switch is bad,they have a history of it,and also blinker ...

...light position is still so low that oncoming drivers are not complaining. When they were working they would seek the level position at startup but are now stay in the down position. Was at the dealer ...

...light. The headlamp switch, in park position, also apples +12 volts through 10A fuse 23 in the junction block to the right tail light.I need to know which fuse is blowing the instrument lights so you ...

light position , with the ignition on turn light switch so light is on then turn switch so light is off ,open door if light comes on that is the courtesy position if does not close door turn switch to

Question about 2003 Liberty

1 Answer

...go out When I turn off engine and close and lock doors, interior lights remain on 1 ) check the position of ligth switch it is posible that is on ON position MOVE IT TO DOOR POSITION 2) in some ...

Question about 2003 Liberty

1 Answer

No warning, no code, no go! ?????? 2006 Jeep Liberty 4x4 automatic transmission. Shifter in P position ~ Does not roll. Shifter in R position ~rolls., reverse lights illuminate Shifter in D position ~

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...