...power and OPC Help.... WHEN FLAT SCREEN SHARP LCD IS ON .. BLIKNING ON BOTTOM OF SCREEN SAYS OPC Try to use an advice from ...
...What's the blinking pattern? Power 1x (constant) = Inverters or Lamps Power 2x, 1x-3x = Main or power supply power 2x, opc 5x = LCD Panel is dead. power 3x, opc 1-3x = Main or power supply. power ...
Question about Aquos LC-46D62U 46 in. LCD HDTV
...off/on couples time after POWER and OPC flashes,don't ever stop and never get backlight and picture.Ur Video backlight board is dead must replaced. Can you be more specific in naming the board
Question about Aquos LC-46D62U 46 in. LCD HDTV
...at all?Power and OPC lights well flash,but push on/off power button do this couple times after the Power and OPC flashes well backlight come back on well work.This problem very common is Sharp
Question about Aquos LC-42D62U 42 in. LCD HDTV
...OPC flahes.Power LED,OPC flashes,push power button again,do this at leat 5 or 6 times somtimes the backlight will come back on and work.The power LED,OPC light flashes,turn off/on more than 5 or 6 ...
...Power and OPC LED light indicators blink continueosly.Not the power supply board,it the Tuner board that take in the comming broscast signal that have the problems.You still can used this tv.Push the ...
...OPC unit, and power the machine back on. Print a test page. If error continues, proceed to step 2. Power the printer off and remove the OPC unit. Check the OPC Marker Sensor. If it is unsnapped or ...
...POWER and OPC flashes.POWER and OPC some will flashes again and wait just push the power button again and wait.Sometimes have to push power buttons and wait power button push out of three or four ...
Power and OPC LED lights flashes?Common on Sharp LCD tv.Tv is still useable.Tv have Tuner signal board problems.Every times Power and OPC LED lights flashes.Just push the remote power button again and
Question about Aquos LC-46D62U 46 in. LCD HDTV
...Power and OPC LEDS lights flashes alots many times as the tv getting older.This how i solved it.If POWER and OPC LEDS lights flashes,just press the remote power again wait awhile.Sometimes POWER and ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions