Questions & Answers for: oil injection solenoid robinair

...OIL.SAYS PRESSURES EQUAL. Please check the following: Low side manifold gauge is going to -13"HG while you recover refrigerant from the vehicle.If low side gauge not rich to that lavel then vacuum ...

under vacuum down machine started pulling oil front injection bottle You need to Change ''Oil inject" solenoin from small manifold assy. Note:Green dot OR blue label denotes are oil injectoct solenoid

...oil injection then you may need to check oil injection CHECK VALVE or oil injection SOLENOID ( Both located under Hidg side panel mountin valve). NOTE: UV Dye is not a problem for oil injection! I ...

...OIL INJECTOR SOLENOID ' coil and plunger. It may need to replace solenoid coil OR rebuild plunger. Located in the INLET MANIFOLDASSEMBLY (where use 5 pics of small solenoids). Green dot OR Blue label ...

...to do Just following # Check oil drain solenoid for any debris or damage inside the solenoid flunger. Replace/rebuild as needed. Hope this will solve your problem. Don't forget to vote for my ...

oil inject solenoid is clogged up. when you take the covers off there is a small block with 5 solenoids in the back of the machine ( not the big 2 layer block) the solenoid sticking out form the other

have to clean oil injector solenoid or replace the new one. To find oil injector solenoid (S3) in the manifold assy. see the attached picture marked with green arrow. Hope this will solve your problem

...not inject oil You need to Rebuild/Replace oil injector solenoid, Located on "Inlet manifold block". Check attach picture to find location of oil injection solenoid. Hope this will help you. ...