Questions & Answers for: move washer pedestal

washer sits firmly on the pedestal and the pedestal does not rock on the floor at all. Does anybody have any ideas of what could be causing this vibration & what I can do to stop it? Thanks in advance

pedestal, the washer is quite top-heavy, and the added weight in the bottom helped immensely. Second, make sure your washer is level, both the feet resting on the pedestal and the feet of the pedestal

...them. What do we need to do to install now? Do we treat both machines as they were going to be moved? Yes!!!! Do not lay the machines on their backs with out the shipping bolts/hardware

...washer to the pedestal with bolts and nuts. I had a GE that did the same thing. I finally laid them on their side, drilled out the holes to fit bolts and washers I bought from Home Depot. They really ...

washer didn't move at all before we installed the pedestals. Now if moves 6 inches during spin cycle. The washer was perfectly level (double checked) after installation of pedstals. what is the model

...washer has a firm foundation and you have the leveled the feet correctly, it should not move when you apply any pressure at these opposite corners. If you have questions, please let me know. I hope ...

washer that is on the pedestal and during any of the spin cycles the thing shakes violently. The machine is level what can we do? unfortunetly this is common , these new frontloads spin fast even with

...washer. Move the pedestal over to the washer and slide the keyhole openings of the pedestal over the two partially installed screws. Position the pedestal against the top of the washer and insert the ...

pedestal with screws going into the bottom of the washer or dryer.  Many times it is inset so you do not normally see it.  Remove the screws in the bracket and it should come right off. 

...and lift the washer off the pedestal. You might need to get levelling bolts for the washer or check to see if the bolts are on the bottom of the pedestal. Make sure you get help to move the