Questions & Answers for: Jeep light bulbs

...bulbs are good. When reinstalling the bulb holders, check that the little flanges on the holders are properly inserted into the tail light housing. Reconnect electrical connector, and reinstall ...

...bulbs at each corner. On the brake light staying lit, check to see if the left-rear bulb is installed correctly and is the correct bulb for the application. I've seen people force bulbs in sockets ...

...light is out and don't know which bulb to change, I opened up the case and there are 3 bulbs top, middle and bottom which is the correct bulb to change. Have someone apply brakes. Observe which bulb ...

light bulbs in the wrong way? if you look closley at the bulbs there is two pins either side on the round silver part. 1 pin sits higher than the other, make sure you fit the bulbs in the bulb holders

2000 Cherokee: brake lights out but bulb still works. fue ?... Brake lights out but bulb still works. Fue ? replace bulb using twin element bulb if still no joy then check for power at bulb if ok then

...light bulbs are twist mount settings inside the light casing. 7) Twist out the mount setting, change the bulbs, and reset the light mountings. 8) To put the light casing push the light casing back on ...

...light assemblies in which the socket and bulb are removed from the back of the assembly.The bulbs are held in their sockets in a number of ways.Some bulbs are simply pushed into and pulled out of ...

...light or meter? Is it getting a full 12 volts or more? If you are is the bulb getting a good ground? If all this is good maybe the bulb you are trying is no good. Even new bulbs can get the filaments ...

...bulbs, bulb sockets, the brake light switch and checked the fuses. the turn signals on the front work, but none of the rear lights (turn signals, reverse lights, and brake light) come on. only the ...

exterior lights i dont have any park lights,brake lights or tail lights. i only have head lights Check the fuses and check the bulbs. All of the rear bulbs are the same!! Check the fuses that are ...