Questions & Answers for: input devices Music

Ad

Question about Alpha Personal Recording Studio

1 Answer

...input and output sourc. whats wrong???? It sounds like you have NOT connected via the recording software. It is like the normal Windows software audio has hijacked the audio system even though it is ...

Ad

Question about Alpha Personal Recording Studio

1 Answer

...knowing what you are using makes any response a wild guess. IN GENERAL you must configure both the input and output device within the recording software you are using. I use Sonar and one has to ...

Ad

Question about Xenyx 1832fx Mixer 18 Input 32 Bus with Efx USB

1 Answer

...form computer to board using USB works but the signal for input doesn't work In the control panel, "sounds and audio devices" under the "voice tab" make sure the INPUT is set to the Xenyx

Question about Xenyx 1832fx Mixer 18 Input 32 Bus with Efx USB

1 Answer

...you to check the component RT1 which is a negative temp coef resistor in series with the power line input. This device is an input surge limiter that heats up and conducts when it gets hot as current ...

Question about P500H Promethean Bass Amplifier Head (500 Watts)

1 Answer

...devices without a balanced input. If the receiving device has an XLR input then it will be ballanced and using an XLR to XLR cable should work. You did not mention what you were trying to drive so I ...

Question about I ONIX U42S 4x2 USB 2.0 DESKTOP RECORDING STUDIO

1 Answer

...input and no sound is coming through. I changed nothing on the lexicon so I'm baffled. Any help would be appreciated. Thanks. Probably the sound and devices settings in Windows control panel have ...

Question about PMP2000 800 Watt 10 Channel Powered

1 Answer

input for higher output devices. Saturating the input(s) will cause bad distortion. Observe if any of the clip indicators are coming on. If they do, then use the pad buttons. If they still come on due

Question about Onyx 1620i Recording Mixer

1 Answer

...devices are selected and enabled, and their volume level is up- even if you are operating through the Mackie software console.If a Mac- check the Chooser to make sure that input device has been ...

Question about Onyx 820i FireWire Recording Mixer

1 Answer

The other two aren't being picked up by the person on Skype at all. Skype allows only one audio input at the time. You can set up the input device in the skype menu. Try connecting all microphones

Question about Frontman 212R 100W 2x12 Guitar Combo Amplifier

1 Answer

...is the pre out used for PRE OUT/PWR IN - (1) Effects Loop - Connect PRE OUT to an effects device input, then connect the effects device output to PWR IN. (2) Multiple Amps - Connect the primary ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...