Questions & Answers for: hotpoint wf640

Hotpoint Aquarius WF640 Keep getting H2O message on display abd does not progress to next cycle. check your water supply to the machine is of adequate pressure . this is the sign when the machine is ...

...wf640 has test showing will not reset to use This has happend to me today! this is the fix Press and hold the Start/Cancel button until message clearsNow press both Start/Cancel and On/Off buttons ...

hotpoint wf640 washer says 'test' on digital display. what does this mean? hold down start button untill unit comes out of test. Then hold start and on/off button untill it gives you test end message.

hotpoint wf640 has f - 07 flashing what does it mean and how do i fix this? same problem if you here how to fix it let me know

hotpoint aquarius wf640 showing f-07 error code what is this problem and any ideas how to solve it it's the heater relay stuck. you will need a new power board. and heater.

test light hotpoint aquarius wf640..... the test light is on, and will not reset or do anything now...help!! Press and hold "on/off" and "start" buttons together for five seconds.

...indicates that the motor tacho has broken or become detached, this is to be found on the end of the motor shaft. Pleawse rate my solution. Thanks. My hotpoint Aquarius wf640 washer belt keeps coming ...

...hotpoint aquarius wf640 is flashing fault F08 on the display.Can anybody tell me what that fault is please & the remedy if they know it? Thanks Dave. F08 means the heater relay on the main ...

hotpoint wf640 Remove the lower rear panel of washer, locate and remove the large black hose fastened to bottom of drum. Remove and clean plastic filter inside the hose. Reassemble and test for leaks.

Hotpoint Aquarius WF640 - What is Fault code F01 please? Hi from retired Englishman in SW France, My list for nearly all of the Indesit (Hotpoint, Ariston) washers suggests there is a fault with the ...