Questions & Answers for: front video jacks vcr

...video has 2 scarts at back and av jacks in front if your remote has not got AV button press the ch- key till you see AV3 on desplay. If you still have the user manual refer to this. hope all goes ...

...front or back of your VCR. Turn on your VCR and TV, so you can see the input from the camcorder. You might have to select "Input 1/2", "Line 1/2", or "VIDEO" depending on your VCR model. You should ...

...front or on the back, then any & all output jacks from VCR\DVD goes to INPUT\OUTPUT of the TV. In other words:: output of audio on VHS\DVD to input of audio on TV( RCA jacks). Output of video on ...

front. The cable does work for 10 seconds, and then vcr cuts off. Are you talking about the part that connects the cable from the wall to the tv? I do not really understand which part on tv or vcr. It

...video, red (or white ) into audio for camcorder. on the vcr end. if the front of vcr has jacks. plug em in same way. then put vcr channel on av-1, video 1 or whatever, till whatevers on the camera ...

...video appliance. If you don't have this cable they are available at your local Radio Shack, Best Buy and other electronic stores. On you DVD player locate the three OUTPUT connectors at the back of ...

...front audio/video jacks on an Emerson Vcr Ev818. My cord is too short to reach the jacks on the back of the Sharp tv. Can I record on the vcr using those front jacks on both units. The front jacks on ...

...video, 1 audio (mono) input in front; RF coaxial antenna input in back Feature: Mono output and built-in speaker; headphone jack Model: MV13M2This means that you do not have "A/V output" jack to ...

...video without remote I was able to get the Sylvania TV to accept a different input (the remote was lost) by connecting the DVD to a Sony VCR using composite RCA jacks then connecting that to the ...

...video jack in front of tv. How do I connect DVD/VCR player to cable box / TV? If your DVD/VCR combo player has three RCA connectors (yellow, red, and white), you can connect them to the corresponding ...