Cold water runs continuously through the wash cycle. Tried running several cycles and still continues to run. Seems like the switch to stop the cold water from running in is not working properly. When
cold water keeps running after cycle ends When rinse cycle ends the cold water keeps running. Your water inlet valve is sticking which means that it needs to be replaced. You can get it at your local ...
cold water constantly runs even when the knob is pushed in to turn washer off. If it fills with water and starts the cycle and the water keeps running in then your water inlet valve on the back where ...
Cold water will not run into bucket. Hot water will and when warm water is selected on hot runs into bucket. Reverse the cold water hose ends temporarily to see if water will flow (looking for a ...
Cold water keeps on running If it fills with water and starts the cycle and the water keeps running in then your water inlet valve on the back where the water supply comes in is sticking. It needs ...
Question about WSXH208A Front Load Washer
...controlled water valve for both hot and cold water on the back of the washer, do both settings not shut off? if it is just the cold pull the washer out and replace the cold water solenoid water
Question about Water Cooler with Storage Cabinet
...water on the cold side but running free on the Hot side.Yesterday I flushed the cooler out with vinigar and hot water but today we have a problem I have same problem keeps running till freeze up so i ...
Cold water won't stop before rinse cycle When we run speed wash (not sure of other cycles) just before the spin cycle the washer keeps letting in cold water through the detergent tray. It does not ...
Question about WM2688H Front Load Washer
...cold water keeps running will not cut off Water level switch or water valve problem depending on what you have to do to get water to stop. If only way us cutting off faucet, then water valve is ...
Question about WM2688H Front Load Washer
...cold water with Rinnai tankless water heater. Sometimes when running hot water the Rinnai tankless water heater periodically starts beeping and flashing code 25 and the water starts running cold. I ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions