...when i attempt to turn on. I took the back panel off and there were no apparent burn marks on the boards. The power board still puts out the correct 24/12/5v of power to the tuner board, but dont ...
.....i have a 32 inch polaroid and it just wont power up In case of FLM-3232 this can be both the main board and the power board. I'd say the odds are in your favor that it is the power board - this ...
...power led light turns from red to blue when power button is pushed but no picture. wondering what board it may be all caps look good, no lose wiring, or burn spots any where on boards, looking for ...
Question about FLM-3734B 37 in. LCD HDTV
Just put in new power supply board .was working maybe 10 minutes and it went out. Power supply does turn on and off with remote. What could be the problem? possible inverter board bad or bad main ...
Question about FLM-3734B 37 in. LCD HDTV
I have a Polaroid 40gsr3000 40 in lcd tv. sound works no picture. think maybe inverter board. One board in middle of back .one long strip board that runs along bottom of tv. Is this inverter board? ...
Question about FLM-3734B 37 in. LCD HDTV
I have a Polaroid TV FLM-373B it was dead replaced the power board now I have picture and sound. But I still have a dark spot center lower screen. Is this a T-con board problem?? screen problem Sounds
Question about FLM-3734B 37 in. LCD HDTV
...Sounds like back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked ...
...coming on back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked ...
...this stop Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked ...
Question about FLM-3734B 37 in. LCD HDTV
...no picture Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked ...
Usually answered in minutes!
391 Questions
300 Questions
256 Questions
225 Questions
178 Questions