I try to do the next load of laundry the fabric softner spot is full of water. Why? It obviously is backed up or splashed in from the wash. And if it is just water why worry about it. According to the
...back, this has now stopped solving the problem and the softner just sits there till i have another go at washing it out. the machine is 5-6yr old now, no other problems with it, touch wood!! Either ...
...softner. if the cup is removable, remove and soak in hot water Take the top off, three screws in the back, top front left is the dispencer assembly, you will see some crusties(thats what I call them) ...
...it is very difficult to get the seal on it to seat back in properly. To help prevent against future build ups, pre-diluting your fabric softner with water ahead of time will slow the build
How do I clean back flow filter on water softner I need details on how to clean the back flow filter on my water softner. you dont..you just replace it.
...still full of fabric softner. Do you know what is the problem? Take tray back out. Take all the components apart and clean all the tubes. Capillary action will not work with residue left on the
Question about Bravos MVWB400V Washer
...comes out the front, rear, and right side. I may be coming from the softner side. When I did not turn on softner it did not leak. I took back cover off and could not find leak. Coming from loose
Question about TROMM WM2688H 4.0 cu.ft. Front Loading SteamWasher
...softner section, i have tried to clean inside the compartment with a tooth brush too and tooth pick but no water will rinse in that section, clogged from the top part of the machine?? remove soap ...
Question about TROMM WM2688H 4.0 cu.ft. Front Loading SteamWasher
...softner. Open the door fully open and carefully prize the entire housing out. Clean it with hot water and put it back in. Some machines require the slide in tray be raised about 70 degrees (most ...
Question about TROMM WM2688H 4.0 cu.ft. Front Loading SteamWasher
...back and forth while moving the drawer in and out from its stuck position and maybe get it over the top of the softner tray and free the drawer. the top of the softner is popped up a bit and is ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions