...80% that you have a bad hub bearing on the drivers side. To get to it, you must remove the brake assembly and axle retaining nut (do nut first with vehicle on ground, tire on) If wheel has removable ...
...80°F) (90°F) (100°F) (110°F) Air Temperature -3 to 3°C 1 to 7°C 3 to 9°C 6 to 13°C 10 to 18°C at Center Panel Outlet (27-38°F) (33-44°F) ...
...35 mph to 80 i have a 96 a JGC zj at 35mph all the way up to 80-90 mph it has a slight studder almost like its misfiring i replaced plgs wires cap rotor iac sensor the codes its showing are injector ...
...a 98 4.0 jeep on rods and mains. Tighten all main bearing bolts to 108 Nm (80 ft. lbs.) torque. Install the main bearing cap brace. Tighten nuts to 47 Nm (35 ft. lbs.) . Connecting Rod Nuts 33 ...
...35 to ship both back.. 40 days later still nothing.. after contacting everyone from ebay paypal and credit cards I was finally able to get some more information from the guy and contacted the local ...
...80's models if you don't have air conditioning) 34 (1984-86) EGR solenoid circuit shorted or open OR 34 (1987-1991) speed control shorted or open 35 Cooling fan relay circuit open or shorted ...
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,715 Questions
2,521 Questions
