Questions & Answers for: 250 volt

Question about 20V500T 20" TV

1 Answer

...from the net. i would appreciate it if you c`ould help me! replace the capacitor 10/250 volt or all 250 volt capacitors around the plyback section. and check also the supply of RGB it is 180

Ad

Question about AVR-1403 Receiver

1 Answer

volt meter also goes up to 250 volts. When this happens, can my Denon withstand such a power surge without getting damged? no it will be damged need hi end monster power strip hd700 or better off ebay

Ad

Question about B25A11Z 25" TV

1 Answer

Zenith Wide screen The colors are side by side and it has a horizantal Hourglass. What can i do to fix it. change the capacitor at the of the plyback .the is 4.7/250 volts or 10 /250 volts

Question about 2005 KLR 250

1 Answer

...250 have to have battery? Yes the Kawasaki KLR 250 has a battery albeit almost as small as a 6 volt battery we all played with in 5th grade science class. The 2002 model uses a 12 volt, 4 AH. ...

...250 volts alternating current = high voltage 110 v = 110 volts alternating current = high voltage 110 v is just another name for 125 vac -- it's called the "nominal" voltage. So, the answer is yes, ...

...to 12.8 volts) Then again while running, and the volts should be 13-14ish. By the way, a YZ 250 doesn't have a battery, what bike is

Question about Electric Ranger Gxt 250 Amp Generator/Welder 125 Volt, 250 Amp, Model# K2382 2

1 Answer

Lincoln ranger 10,000 putting out 19 volts AC and 9 volt DC.I have replace the bridge diode that didn't help . Replace the power board

Question about RS2620 Single Cassette Deck

1 Answer

...250 volt mains supply use a 250 volt fuse. However the crucial one is the amp rating. If it was a 300ma fuse installed a fuse no greater than that should be used. If it was a 2amp fuse a 1.5 could be ...

...inherited from my mother-in-law and I need its manual. Where can I down load it? It uses 200 - 250 volts motor Get model # and serial # and company and try to trace it down on a search engine on

...into a 220 outlet only? if the plate on the side says 220 volts then it will only work on 220 -250 volts outlet at a 110 volts outlet it will fail and at anything more than 250 volts it will

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...