code E 13 mean? For a Bosch washing machine, Error 13 is pumping time exceeded. So, in general, the issue is pump related. Things to check would be if the pump is blocked (it can be cleaned out if you
Question about Nexxt 300 Series WFMC2201UC
13 error code My brand new bosch Nexxt 300 series washing machine is showing an error code that says E:13. What does this mean? Is it an easy fix? Put the washer on cold and run "TWO" cycles. There is
...Code 13 Washer won't drain Hi I have a Bosch Nexxt 300 Series Washer. It keeps coming up with an E:13 error code and won't drain. Please help. First, unplug your washer. After that find the little ...
Question about 3.81 cu ft WFMC530 1UC Nexxt 500 Plus Series Washer
...13 on the display. I called Bosch and was told to reset the breaker. I did that, started the washer again, and received the same error code towards the end of the cycle. Now, my clothes are locked in ...
Question about Nexxt 500 Plus WFMC5301UC
...13 error code on my Bosch 500 series washer. The drain pump impeller was plugged. Access the drain impeller at the bottom front right corner. Just put a pen in the hole and turn the cover. Then ...
Question about Nexxt 500 WFMC3301 Front Load Washer
code 13 mean on Bosch 500 washer? Timed out on drain cycle, basically you either have an outlet blockage or something is trapped in the pump, you can check the pump by opening the bottom right flap on
...13 Our Bosch nexxt 500 plus series washer gives an error code of E: and keeps flashing .... plugged it in and out still same error.... door is locked closed....no error number is displayed beside the ...
Question about Nexxt 500 WFMC3301 Front Load Washer
...code 13. What to do The code means that the water is taking to long to pump out unsrew the pump filter at the bottom front right have some towel ready to soak up the water clean and replace ...
Question about Vision 300 Series DLX WFVC4400UC 27" Front-Load Washer - White
...13 code flashing The washer will not drain and door would not unlock. Tried running spin and rinse cycle but got an E:13 error code. From user manual: Indicator light "rinse" is lit and display is ...
Question about Vision 300 Series DLX WFVC4400UC 27" Front-Load Washer - White
I keep getting an E-13 error message on my front loading Bosch washer - what does that mean? Bosch Washing Machine Error Fault Codes
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions