Questions & Answers for: 10 snake Music

have a yamaha 166cxmixer into roland 1608 snake with controller there is a switcher between them and I'm getting no signal the reac light is flashing and I can't get the controller to work You are ...

Ad

Question about 1604 Vlz3 16 Channel Mixer

1 Answer

I need to know step by step how to hook up my entired system using my macki board. I have a Mackie 1604 Vlz, a power amp for mains, a power amp for subs, a crossover, a vocal effects processor, and a ...

Ad

Question about Eas Element Active Acoustic Guitar Pickup System

1 Answer

I have the LR baggs Element Active VTC in my Seagull. It works fine, except when I plug it into the PA system at church. There is a windy, rumbling-type sound that happens whenever the volume knob is ...

Question about Xenyx 2222fx Premium 22 Input 2/2 Bus Mixer

1 Answer

I have a Behringer 1202fx and I'm going to use it with a pair of Harbinger APS15. The line inputs on the APS15 are unballanced R&L RCA and XLR. The Behringer 1202fx mains are 1/4" unballanced

Question about Allen&Heath PA12-CP

1 Answer

Ground issues Rule #1: All interconnected devices... amps, speakers, etc... SHALL be powered from a single receptacle OR power conditioning module. Rule #2: All interconnecting audio cables SHALL be ...

what is the best way to connect an external EQ or Feedback Destroyer unit to a Behringer PMP3000 I have a PMP3000. I also have an external EQ (in fact a Feedback Destroyer Pro FBQ2496 - but ...

Question about Sx2442fx Eurodesk 24channel Mixer New

1 Answer

...to our singer and our audience, we are a house of worship and this interrupts us. (Equipment: 100ft Musicians gear snake, 2 Allto Professional 800 Watt Active speakers and 1 Alto monitor with ...

Question about Europower Pmp5000 Powered Mixer Pmp5000

1 Answer

connecting compressor and equalizer to pmp5000 I use pmp5000 and connect to an amplifier then to the speakers. Now I want to add the effects of 31 band equalizer and compressor and direct the signals ...

no output on the master but there are output on group and aus out broken faders...bad muting fet on master buss, dirty insert jack on stereo buss...could be a lot of things, last drive stage to output

What adaptor do I need to plug a guitar into a snake with xlr inputs? You will need a direct box as an interface. You need to not only adapt the 1/4" guitar out to an XLR for the snake, but change the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...