LG WF-T753A Top Loader washer hot water inlet valve

Question 1

0helpful

2answers

Fuzzy logic- wf t753A won't allow water in on start. Think the lid switch cut off may be jammed. how can I access it?

Can you remove the lid? That may give you access to the sensor/switch.

Jul 02, 2015 • LG Washing Machines

0helpful

2answers

Asko front loader fills with water when switched off and once turned on will immediately sense it and drain it from the machine. What could be the problem? The machine still washes beautifully, even after...

inlet valves are out of service or malfunctionnign follow the steps .

1. unplug your machine power cord.
2. open the door and also open water supply , if your machine fills the water then 100 % problem is with your inlet valves , replace it , simple

regards

Dec 31, 2014 • Asko W6021 Front Load Washer

1helpful

1answer

Lg wf 801 top load washer won't fill .take water line off cold inlet & put on hot inlet will fill . put back on cold inlet for rinse cycle all ok .

Question was answered earlier. Thank you

Jan 19, 2013 • Washing Machines

0helpful

1answer

I only have a hose attached to the cold water tap and inlet valve of my Fischer & Paykel top loader washing machine as I only do cold washes, this hadn't been a problem until recently, when th

it could be that the water level got to high and came out of the valve you could try putting a cap on the valve and see if that works and if it does not then it might be a bigger issue.

Dec 23, 2012 • Fisher and Paykel GWL11 Top Load Washer

0answers

After replacing the inlet valve assembly on a lg top loader washing machine, the machine now fills up with water and does not stop. How can this be fixed?

Be the first to answer Oct 26, 2012 • LG Washing Machines

0helpful

1answer

I have a LG WF-T753A washing machine. The hot water is not working, but has in the past - cold water is fine. When it goes to fill up with Hot only, a slight hum, and then it stops, but no water. Have...

Check to see if the screen inside the water-inlet valve is clean. (The water-inlet valve is the device on the washing machine that the fill hoses are attached to.) If it's clean, you probably have a defective water-inlet valve. If so, completely replace it.

May 04, 2011 • LG WFT1071TP Top Load Washer

2helpful

1answer

NO WATER INTAKE WHILE RINSE OPTION IS ON

It sound like the cold water inlet valve is faulty, the rinse cycle uses only cold water, and the water in the 'wash' cycle is probably hot.You need a new inlet valve, which on your machine is probably a double hot/cold unit.If you can't get a new inlet valve, a handyman/electrician may be able to change the wiring to use the 'hot' inlet valve for cold water which will allow the machine to wash, and rinse, using cold water through the hot valve..Tikka?...Good luck...Nomess

Jun 01, 2010 • LG WFT1071TP Top Load Washer

1helpful

1answer

No water going in

Hello mariel_black,

If you have good water pressure at the washer source valves I would shut both the Hot and Cold water source supply valves off then remove the water inlet hoses at the back of the washer and inspect the water inlet screens for sediment blockage.
The washer inlet screens look like this;

If the above items check OK reconnect washer supply hoses and turn on water supply valves. If we are talking about a FAV6800AW/FAV9800AW washer then I would go into Service Mode Board Output Test page 16 of the Service Manual and turn on the Hot and Cold water valves and see if the machine water inlet solenoids operate and release water into the wash tub. I will summarize how to get into Service Mode and perform the check of the Hot/Cold washer inlet solenoids.

Enter the Service Mode by pressing and holding the Enviro Plus and Spin Only keys for three seconds or the display reads “00”

Press the Delicates key the display will read something like “ot” the lid will lock. Now press Spin Only key this will turn on the cold water valve, do you here water flow into the washer? Press the Spin Only key to shut the cold water valve off.

Now press Normal key, do you here water flow into the washer? Press the Normal key to shut the valve off or the off key to get out of Service Mode. If you don’t hear either Hot/Cold water inlet valve operate then you have a bad solenoid or loss of 120VAC applied to that solenoid valve and more troubleshooting may need to take place and possible replacement of the washer water inlet valve assembly. Post back if you have questions.

Jun 06, 2009 • Maytag Neptune FAV6800AW Top Load Washer

0helpful

2answers

I have an LG washing machine model WF-T755A After washing completed, if water not turned off at taps, the unit slowly fills up with water. The last time causing it to overflow and flood the floor

Water inlet valve is not sealing off 100%. Replace inlet valve (the part where the hose attached to the machine). didn't find that exact model listed so couldn't give you a part number. Usually LG's have a separate valve for the cold and the hot. If you turn off one valve where hoses connect to household plumbing you should be able to figure out if it is the hot or cold. (most often it is the cold) Leave both valves off when not using washer until fixed. (note: usually on LG washers, if you have unit connected to power and the door closed, if it fills with water as your machine did, the water level switch will trip and automatically pump the water out, even if washer is not in use and the power is "off".)

Aug 31, 2008 • LG Washing Machines

0helpful

1answer

Whirlpool top loader

You either have a defective pressure switch or water inlet valve. Start to fill the machine with warm water so that both solenoids on the water inlet valve (hot and cold) are activated. After about 30-60 seconds, push the timer knob in to stop water flow. If the water continues to flow, replace the water inlet valve. If this is the case, it may take a few times of starting and stopping water flow to allow solenoid to heat up and become symptomatic. If water flow stops abruptly each time knob is pushed in, you most likely have a defective pressure switch (water level switch).

May 09, 2008 • Whirlpool LXR9445JT Top Load Washer

Question 2

Anonymous

Contributor 1 Answer
Posted on Dec 27, 2012

Anonymous

Contributor

Joined: Dec 27, 2012

Answers

1

Questions

0

Helped

3758

Points

1

Http://www.jordansmanuals.com/ServiceManuals/LG/Washing/WF-T753A/WF-T753A%20Service%20Manual.pdf

Answer 2

Anonymous

Contributor 1 Answer
Posted on Sep 02, 2008

Anonymous

Contributor

Joined: Sep 02, 2008

Answers

1

Questions

0

Helped

3758

Points

7

Just found this whilst looking for known issues with my machine as the cold water won't stop when filling.

http://safemanuals.com/user-guide-instructions-owner-manual/LG/WF-T753A-_E

Anonymous Sep 02, 2008

ok so for some reason the 'E' on the end did not appear in my previous post so therefore it won't work (and where is the edit link??).

try this . or:

safemanuals.com/user-guide-instructions-owner-manual/LG/WF-T753A-_E
Anonymous Sep 02, 2008

Sorry, I should also add here:

You'll find the WF-T653 details (its the 6.5kg version of ours)

WF-T653A Body Assembly.pdf

(PDF File - 87.31 kb)

Date added:8/28/2008

WF-T653A Parts List.xls

(XLS File - 28 kb)

Date added:8/28/2008

WF-T653A Top Cover Assembly.pdf

(PDF File - 87.82 kb)

Date added:8/28/2008

WF-T653A Tub Assembly.pdf

(PDF File - 137.11 kb)

Date added:8/28/2008

×

Answer 3

Jeeva36

Contributor 2 Answers
Posted on Apr 25, 2019

Jeeva36

Contributor

Joined: Feb 28, 2009

Answers

2

Questions

1

Helped

3791

Points

4

Actually getting hands on service manual is not easy as repairing your machine!...

Because of manuals are only available to authorized service centers and service technician.

You can service your machine easily.
You need correct tools and some knowledge about how the machine works

Related Topics:

LG WF-T753A Top Loader washer hot water inlet valve

3 Answers

Anonymous

Anonymous

Jeeva36

Add Your Answer

Attachments: Added items

Related Questions:

Fuzzy logic- wf t753A won't allow water in on start. Think the lid switch cut off may be jammed. how can I access it?

Asko front loader fills with water when switched off and once turned on will immediately sense it and drain it from the machine. What could be the problem? The machine still washes beautifully, even after...

Lg wf 801 top load washer won't fill .take water line off cold inlet & put on hot inlet will fill . put back on cold inlet for rinse cycle all ok .

I only have a hose attached to the cold water tap and inlet valve of my Fischer & Paykel top loader washing machine as I only do cold washes, this hadn't been a problem until recently, when th

After replacing the inlet valve assembly on a lg top loader washing machine, the machine now fills up with water and does not stop. How can this be fixed?

I have a LG WF-T753A washing machine. The hot water is not working, but has in the past - cold water is fine. When it goes to fill up with Hot only, a slight hum, and then it stops, but no water. Have...

NO WATER INTAKE WHILE RINSE OPTION IS ON

No water going in

I have an LG washing machine model WF-T755A After washing completed, if water not turned off at taps, the unit slowly fills up with water. The last time causing it to overflow and flood the floor

Whirlpool top loader

Not finding what you are looking for?

WFT1071TP Top Load Washer

Fuzzy logic- wf t753A won't allow water in on start. Think the lid switch cut off may be jammed. how can I access it?

Ask a Question

Top LG Washing Machines Experts

Mike Cairns

ZJ Limited

Cindy Wells

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

LG WF-T753A Top Loader washer hot water inlet valve

3 Answers

Anonymous

Anonymous

Jeeva36

Add Your Answer

Attachments: Added items

Related Questions:

Fuzzy logic- wf t753A won't allow water in on start. Think the lid switch cut off may be jammed. how can I access it?

Asko front loader fills with water when switched off and once turned on will immediately sense it and drain it from the machine. What could be the problem? The machine still washes beautifully, even after...

Lg wf 801 top load washer won't fill .take water line off cold inlet & put on hot inlet will fill . put back on cold inlet for rinse cycle all ok .

I only have a hose attached to the cold water tap and inlet valve of my Fischer & Paykel top loader washing machine as I only do cold washes, this hadn't been a problem until recently, when th

After replacing the inlet valve assembly on a lg top loader washing machine, the machine now fills up with water and does not stop. How can this be fixed?

I have a LG WF-T753A washing machine. The hot water is not working, but has in the past - cold water is fine. When it goes to fill up with Hot only, a slight hum, and then it stops, but no water. Have...

NO WATER INTAKE WHILE RINSE OPTION IS ON

No water going in

I have an LG washing machine model WF-T755A After washing completed, if water not turned off at taps, the unit slowly fills up with water. The last time causing it to overflow and flood the floor

Whirlpool top loader

Not finding what you are looking for?

WFT1071TP Top Load Washer

Fuzzy logic- wf t753A won't allow water in on start. Think the lid switch cut off may be jammed. how can I access it?

Related Topics

Ask a Question

Popular Questions

LG Tromm WM2277HW will not spin both directions, LE error.

Ue error code on the display

LG Tromm Washer

LG TROMM CLOTHES WASHER - "LE" ERROR CODE

My LG washer wont turn on, if I unplug it from the wall and plug it back in, it will work for one cycle, but then the next time I go to use it, I have to unplug it again to get it to work.

Top LG Washing Machines Experts

Mike Cairns

ZJ Limited

Cindy Wells

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides