I have a Scotts Turf Builder EdgeGuard Mini, and I'm using Ace turf builder (crabgrass preventer with fertilizer). What setting should I use???

Here are the steps:

1. Set Micrometer. Turn micrometer until "8" is centered in window.
2. Position Spreader. Stand the spreader on its handle with the Scotts logo facing away from you. ...
3. Check for Proper Calibration. ...
4. Adjust Calibration Screw.

May 21, 2022

How To Calibrate Scotts EdgeGuard Spreader

Question edited for clarity 'speeders' to 'Seeders'.

That model is still available very easily from lots of outlets including Amazon. The settings refer to a 'spread per square yard' and is translatable to any broadcast spreader.

https://www.google.com/search?q=Scotts+Turf+Builder+Edge+Guard+Mini

..

How to Find Parts for Scotts Spreader SCOTTS

Go to link above and order.

Semper Fi,
Z

3.5 to 4

Start from the very top. Using a drywal hand saw. cut the morter out or chesel from the first , or top brick.

First, I went to the products website, in this case Lesco and looked up the spreader settings:
https://www.johndeerelandscapes.com/home/spreader-settings.aspx

Then, I went to Scotts website and looked up spreader settings:
http://www.scotts.com/smg/node2/SCOTTSCOM/lawn-care/lookup-spreader-settings/7800015-24900013-s

I cross referenced a product on the Scotts website that uses the same settings as one of those listed on the Lesco website and I found my settings that way.

In my case I was using Lesco Pre-M 0.86% 0-0-7 and wanted to apply 5.3 lbs/1000ft. My spreader was a Scotts Turf Builder EdgeGuard Mini with settings from 0-15. I found out by cross referencing that the Scotts Speedy Green 1000 and my spreader used the same settings. So I ended up using the recommended setting of 5.5, as listed on the Lesco website for the Scotts Speedy Green 1000, to apply 5.3 lbs/1000ft of pre emergent using my Scotts EdgeGuard Mini.

Hope this helps!

Does the product you are using list any Scotts AccuGreen spreader settings? If so, you can safely use the spreader settings listed for the Scotts AccuGreen. If your product does not list any spreader settings, please give Scotts a call at 866-465-5160.

Hilary @Scotts

You can use the recommended settings for the SpeedyGreen 1000!

Hilary @Scotts

I'm sorry the Scotts Mini Edgeguard Label is not available online. Please contact the Scotts Help Center at 800-543-8873, we would be happy to email or mail you a copy. Stacey@scotts

If the product you are planning on applying has a spreader setting for a Scotts AccuGreen, or  specifically for the AccuGreen 3000; you can use that recommendation in your Turf Builder Classic Drop Spreader.  If they do not have a suggested spreader setting for the Accugreen, or  Accugreen 3000 settings then this question would best be answered by calling Scotts directly @ 1-800-543-8873. One of our associates would be happy to assist you further.