Emachine with dynex dx-e102 ethernet card will not get a connection. I updated the driver, but still the same. an ! mark at the desktop icon. Hardware says working correctly. Wher do i go from here?

speed is a function of line of sight distance so measure distance from wireless router for pc and then open that utililty on pc and see what relative speed is happening

if the signal is less than 3 bars, that is like a wireless tach

need at least 3 to 5 bars to get speed

also, your pc has a network adapter card no doubt might be that it's running a full tilt and needs an upgrade

let me know what you find

Download this driver for your motherboard onto your flash drive: http://downloadnew.org/drivers/network-card/pcchips-a13g-v30a-nvidia-ethernet-driver-103885.html

Install it, reboot and let me know how it goes.

go Welcome To Dynex Support

maybe you need to configure this ethernet switch or it is a password problem i have used a ethernet splitter switch to use two connect 2 computers before purchasing a router which needed to be configured
hope this helps

did you mean this model http://www.dynexproducts.com/pc-435-29-dynex-80211g-wireless-g-wireless-desktop-card.aspx if so then theres the drivers on that link - if not post back exact model

The driver for DYNEX DX-WGDTC is free and the following link.

http://www.dynexproducts.com/productSearch.html?query=pci+wirelesses&resultsPerPage=all

www.dynexproducts.com

Vista you will not need any drivers as long as you run the updates, it will detect it and install them.

Driver of Ethernet card corrupted. download proper driver from following web link as I dont know the operating system you are using.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=97128&taskId=135&prodTypeId=12454&prodSeriesId=316510&lang=en&cc=us