I want to program my new Logitech Harmony One for the [2-channel], [AFD], and the various sound field functions, but I have been unable to record those from the RM-LJ304 remote that came with the receiver. The Logitech site has support for all other functions of the STR-DB940 receiver (that I have tried, anyway), but nothing for these. There are separate buttons for [2-channel] and [AFD] on the front panel, so it would seem reasonable that there are remote codes (or possibly sequences) for these, but I haven't been able to com up with them. Has anyone managed to do this??

Your surround capability is 5.1. Although there is a front panel function button, there appears to be no other buttons to program your unit without the remote. Find your remote or replace it. Ebay is showing replacements at what I consider a low cost. The Sony model is RM-ADU007. Failing that and considering the many remote functions required for you unit, would be a Logitech Harmony replacement. The Harmony remote also comes with a USB patch cord because the user must go online with Logitech to program the remote for your unit. It would be best to the Harmony website prior to buying to make sure it covers your model.

Check your center channel. Most dialogue is routed to the center channel in surround.

Logitech Information you will need to program your Harmony 300 remote...

http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/12556/kw//related/1

Register and download the Logitech manual for free at retrevo.com

http://www.retrevo.com/support/Logitech-300-Universal-Remotes-manual/id/23681bh727/t/2/

It says to hook up the harmony 300 to your USB, go online and have the website program it.

OR

The original remote is ah59-02291a and can be found very cheaply on eBay...

$15 delivered...

http://cgi.ebay.com/Samsung-AH59-02291A-Remote-Control-HTC-Home-Theater-/330558113690?pt=LH_DefaultDomain_0&hash=item4cf6cc879a

Hi, yes of course it is possible! First off, you have to make sure that your Dish device it set on remote address 1 in order for it to be controlled by the Harmony. Then, once you add the device to your Harmony account, if there are any functions that are missing, you can learn them right from the original remote .

Adding a device:
1. In the software, clcik 'Add Device'
2. Follow the on screen instructions.

Learning a command:
1. In the software, click 'Learn IR' next to the icon for your Dish device.
2. Go down to the bottom of the page where it says 'Learn a new command'
3. Type in a name for your command, and click 'Learn'
4. Follow the on-screen instructions.

Hope that helps you get this set up right!

The Harmony 520 remote does not support Favorite Channels.

However, you can set this up by creating a sequence to send the number commands for a specific channel, then map the sequence to a button. See the following link for a walk through of how to do that.

http://logitech-en-amr.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/std_adp.php?p_faqid=9185
The article is for a Harmony 1000, but it is the same process for any remote that supports sequences.

I have seen channel designations like this when using a satellite TV provider. From what I know (which is not a lot, I'm afraid) is that some affiliates offer analog and digital and digital sub channels so an example would be:

05 (main analog channel)
05-1 'digital' (depending on the receiver)
05-2 'digital sub channel'
05-3 'digital sub channel'
etc

So, you may want to try just putting in the main channel '05' when using the Logitech software to program your favorites. Below is a link to a good post on the Logitech forum that tells how to program your favorites. Hope this helps!

http://logitech-en-amr.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/std_adp.php?p_faqid=9691

I had a similar issue and only needed to "re-configue" the remote... Basically, just try plugging it back into a USB cord ( connected to your computer) and go to the original programming home page and click the "Update button." It will re-program your remote as if it was new.. Over time your Harmony may lose or forget the frequency of your various components. This happened to me. Also, make sure the remote has a full charge while you're programming it. Give it a try !

The Logitech Harmony 890 remote control is programmed through the
Harmony Windows Setup Software.

Once installed, you will simply run the program and select the devices you would like to control from menus. This program finds the right codes for you and loads them into your remote control.

You can get a copy of the Harmony 890 Manual by clicking here.

I hope that helps.
_____________________________________________
Harmony 890 Manual Download
Logitech Harmony Firmware Update
Harmony Win Software Download
Harmony MAC Software Download
Logitech Harmony Safe Mode Fix
Harmony Remote Glow Light Fix

I can help you with your Logitech Harmony 890 remote control.

The Logitech Harmony 890 remote control is programmed through the
Harmony Windows Setup Software.

I recommend resetting it up with your components to get rid of the two channel problem.

Once installed, you will simply run the program and select the devices you would like to control from menus. This program finds the right codes for you and loads them into your remote control.

You can get a copy of the Harmony 890 Manual by clicking here.

I hope that helps.
_____________________________________________
Harmony 890 Manual Download
Logitech Harmony Firmware Update
Harmony Win Software Download
Harmony MAC Software Download
Logitech Harmony Safe Mode Fix
Harmony Remote Glow Light Fix

You need to be more specific about your problem.  Have you already programmed your Harmony Remote on the internet?  Does it control all other functions (such as changing channels) on your TV?
Do you have any other components connected (such as a Home Theater Receiver) that might be a source of sound?
Please post more details, and I may be able to help.