VIEWFINDER IS BLANK - Canon ZR830 Mini DV Digital Camcorder

Viewfinder, screen and pictures are blank / black - Nikon ...

https://www.ifixit.com/.../Viewfinder,+screen+and+pictures+are+bla...

iFixitMay 4, 2015 - When I look through the viewfinder or at the lcd it is blank / black. Also when I take a picture and view it on my computer, the picture is blank ...

SONY ' eSupport - There is no picture or a black screen ...

https://us.en.kb.sony.com/.../there-is-no-picture-or-a-black-screen-appear...

Dec 8, 2015 - There is no picture or a black screen appears in the viewfinder or LCDwhen attempting to ... Look to see if an image can be seen in the viewfinder or LCD. IMPORTANT: Some camcorders have both a viewfinder and LCD.

There is no picture or a black screen appears in the ...

Hi, have you tried another memory card in case the other one is faulty ,if the original card is ok then you will have to put into a fuji repairer to inspect. If you are still under guarantee the contact fujifilm.

You need to replace the view finder flex cable.
http://www.ebay.com/itm/Sony-DCR-VX1000-viewfinder-ribbon-cable-/130456335038?pt=Camera_Cables_Cords&hash=item1e5fcdb2be

take the lense cap off

Try adjusting the viewfinder diopter. There's a little dial just to the right of the viewfinder. Turn it while looking through the viewfinder. You want to be looking at an unfocused view or a blank wall. Turn the dial until the focus brackets are sharp. Make sure you do this with your shooting eye.

Its a camera CCD Problem. If the View finder & LCD both showing black then its 100% CCD problem. Let me know Lcd also black? Also make sure lens is not covered by any thing.

Make sure the lens is opening up.

while using slr cameras u always see in the viewfinder bcuz slr is a single lence refleime u can see the picture after shoot by clicking on play back option this is a feature of an slr camera

Hi
When the LCD screen is open the viewfinder will switch of and when it is closed the viewfinder will switch on. You can switch between the two by pressing Monitor select button to the left of the Eyepiece (Viewfinder). as you look at the back of the camera.

Hope this helps.

This is a known problem with the CCD - Nikon will replace at no charge. Go here: http://www.imaging-resource.com/badccds.html