The dryer doesn't blow hot air - Whirlpool LGB6300 Gas Dryer

Sounds like the fan has stopped working if fan doesn't turn no air will blow through there is a censer if this gets 2 hot it will shut down so not 2 cause a fire it fails 2 safe the sorliton is a replacement fan motor.

Hope this helps

Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check outthis electric no heat tip...

heatman101-=
=-

there is a thermal cutout switch that goes bad and opens the circuit to the element.

http://www.applianceaid.com/gas_dryer.html#noheat

when a dryer does'ny blow hot air,it's normally either the element or the stats on the element.

Either bad thermal cutoff or bad element .( first 3 numbers missing on model #)

Check your heat sensors, one or more must be OPEN.

heating element failure 30 bucks and an hour of labor

???? this doesnt make much sense, can see how you would be measuring air flow within the cabinet??? air blowing out unit strong means your gettin good air flow fom within, that is a direct relation as to the amount of (hot) air being pulled across the clothing

check that you have 240 volts to the dryer terminal block
if so check the element and the element thermastats