How do I use the sap function - Samsung LN37A530 37 in. LCD HDTV

Hello
From its main Menu, surf towards its sound Menu.
By using UP/DOWN buttons of the remote handset, select SAP

SAP (Second Audio Program) (for analog channels only) Plays the

program's audio in a second language, if one is available. The TV displays

the word SAP in the channel banner when you tune to a program that is

broadcast with SAP information. SAP audio is broadcast in mono. SAP is also

used to broadcast a program's audio with descriptions of the video for the
visually impaired. Press the right arrow button to turn SAP on or off.
OK.

Sorry the SAP function are only can be change in the Audio option menu or the tv original remote only that have the SAP button.Try website like Remotes.com to buy the tv original remote.

There would not be a SAP button on newer tv's. You will need to access your TV's main menu, go under Audio or Sound options and search through till you find the "language" or special features area. If your tv has the SAP function, you will find it in the menu.

my problem is in the configuration of symbol MC9090 in comunication with sap when send function Key ( F5) .

Question .

What the value that the SAP waiting this process?

Your SAP audio function is on. Look on your remote or in the TV menu for SAP or MTS. There are 3 settings, Mono, Stereo, and SAP... set it to Stereo. I hope this was helpful, best wishes.

Your SAP/MTS function is most likely turned on. This feature has 3 modes: Stereo, Mono and SAP. Stereo and Mono are easy to understand, it's the SAP that can get you. SAP stands for Second Audio Production. It is used to provide weather, information or an additional language translation of a program. Some broadcasters simply transmit the mono audio over the SAP audio channel when the are not using it for other purposes. Other broadcasters simply do not use it, which does not give you any audio. Look on your remote for a SAP or MTS button. If you do not see one, look in your TV user menu for this feature. If you are using a cable box, look in the audio menu of the cable box. You are looking for something set to SAP... just change it to STEREO. I hope this was helpful.

Make sure the sap is turned off. When turned on only a sap audio signal will appear at outputs. If no sap signal you have silence.

Spanish on the screen or Spanish through the speakers on some channels? If its the on-screen display that's in Spanish, you pick the language using the setup menu with the remote control. If you're getting Spanish through the speakers, you probably have turned on the SAP (second audio program) function. In some areas with a large enough population, SAP is often used to broadcast program audio in a different language. On channels with no SAP broadcast you don't hear any problems. The SAP function is usually controlled by a button on the remote and probably got pressed by accident.

There might be a SAP button on the remote or under a cover on the remote, or it might be an audio button, you want Main or Stereo. I couldnt pull up a picture of the remote, but I would suspect that if the SAP function is not in the menu it is probably on the remote.