After dialing for fax it is showing memory low press OK button. after pressing the button the fax is cancelled up.
Please perform the following:
Super NVRAM init
When a super NVRAM init is performed, the all-in-one language and telecom country/region settings
are undefined. The user is prompted to set the language and telecom country/region. Until these settings
are defined, the all-in-one will not return to the Ready state.
CAUTION A Super NVRAM init erases all data that is stored in both the unprotected and
protected NVRAM memory.
To perform a super NVRAM init
1. Turn off the all-in-one.
2. Press and hold down the * and 5 buttons.
3. Continue to hold down the buttons while you turn on the all-in-one. Hold the buttons throughout
the entire power-on sequence.
4. When Permanent Storage Init. appears on the control-panel display, release the buttons.
5. When prompted, set the language and telecom country/region.
6. Allow the all-in-one to return to Ready before using it.
How long is the doc.? is it text or text with graphics?
Try splitting up the fax doc, the fax memory on the device is to small
1,411 views
Usually answered in minutes!
I have the same problem with simple text faxes. If I don't press "okay" my fax machine will receive the fax and print it as though there is no issue. Afterwards my printer no longer shows the error.
after i dial a number the machine is showing "MEMORY LOW" on display unit, how to solve the problem ?
it is not because of the length of doc. because my hp3050 does not load the doc before show this problem.
i don;t know how to fix it.
×