My Maytag Neptune TL Washer keeps giving me the dc (unbalanced) and uc (can't spin) codes. It seems to **t want to go into spin during the rinse cycle. I have readjusted the load, but ** matter; it does it again and again. I can stop it and start spin only and it will work - may need a readjustment of the load (whether small or larger) and start spin again. But, I need to find out what is wrong as babying it along is **t the answer. Help!
If the clutch fails the first thing noticed is a UC or DC error displayed and there is no drain or spin.
If you are seeing the above error and having a problem with spin and drain then the most likely cause of this is the clutch. The clutch fails to lock down the spinners and the basket is unable to go into spin and without a 90 RPM there is no drain.
Replace the clutch.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
253 views
Usually answered in minutes!
My washer starts to spin but doesn't reach top speed so water stays in tub and it then slows down and stops. Do i need to replace the pump or just the belt?
×