Question about Electrolux UltraLux 2000 Bagged Canister Vacuum

1 Answer

My Electrolux Aerus auto rewind chord mechanism is broken. Is there an easy way to remove the back of the canister to replace or fix the spring there?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 43 Answers

Take out the bag and keep the door open.
While the bag door is still open, turn the machine upside down so you are looking at the serial number.
Pull the cord out one foot.
Use a puddy knife and put it between the rubber side rails and the **** end of the machine.
Use a hammer or malett to hit the putty knife from the back of the rubber bumber toward the bag door.
Pull the rubber bumber stright out on both sides.
Once both bumpers are out pull the lower body of the canister from the **** end toward the intake of the machine.
Once the bottom is open you can then service the motor, cord winder, switch, and all other components.
For all the parts to fix the machine visit: http://evacuumstore.com/c-69-electrolux-accessories.aspx?manufacturerfilterid=0

Posted on Apr 17, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CORD SPOOL WILL NOT PULL BACK


Try tilting the vacuum to about a 45 degree angle. Gently tug and release the cord a few times. This usually will release the cord. If not, the cord winder may have broken, or the spring came loose, and it needs replaced/repaired. Take it to the nearest Aerus Electrolux store for help/repair.

http://www.aerushome.com/storelocator/

Jan 19, 2011 | Electrolux UltraLux 2000 Bagged Canister...

1 Answer

How do I repair my Electrolux Lux 9000 cannister electrical cord retraction? It was pulled out as far as it would go and now it doesn't retract.


First, try standing vacuum on it's back end. Gently pull on cord and release. Try this a few times.
If this doesn't work, you'll need to take it to an authorized Aerus Electrolux store and let the service tech repair it. Although it's relatively easy to disassemble, reassembling correctly is trickier. I've had several machines come into the shop disassembled because the owner couldn't figure out how to put it together again.
Also, when taking the cord rewinder apart, there's a risk of breaking tabs that hold it together.

http://www.aerushome.com/storelocator/

Dec 19, 2010 | Electrolux Lux 5500 Canister Vacuum

1 Answer

I have a silverrodo and can't get the cord to fully rewind is there a way to fix this? thanks


It's probably a worn out spring. You'll probably need to take it in to the local Aerus Electrolux shop for replacement of the spring, and possibly the entire cordwinder. You can also call them and see if they're close enough for free pick up and delivery.

http://www.aerushome.com/storelocator/ will help you find the store nearest you.

Nov 17, 2010 | Electrolux Vacuums

1 Answer

How do I open the canister of the Aerus Electrolux Lux Guardian? I need to replace the retractable cord mechanism. Aerus won't help me.


Hi there,

This will not be difficult to open, however, inside may scare you.

Remove your hepa filter cartridge (if you have one)
turn the machine over.
Undo the 6-8 screws there and pull the bottom off.
you should see everything there. If you are careful, just remove the old rewinder, and replace with the new one.

Good luck.
Mark

Nov 08, 2010 | Electrolux Guardian Bagged Canister Vacuum

1 Answer

The chord will not recoil


Try standing it up and gently pull on cord and release. It may rewind after a few tries. If it does fine, then just be careful how far you pull it out.
If it still won't rewind, you need to take it to an authorized Aerus Electrolux store and have the service tech have a look. There are a few things in the rewind assembly that could be causing it not to.

http://www.aerushome.com/storelocator/

Nov 06, 2010 | Electrolux Vacuums

1 Answer

Cord will not reel in


Try standing machine upright to rewind. If it doesn't, it should be taken to a shop, authorized Aerus Electrolux preferrably, and a trained service tech allowed to fix it. There may be a broken piece in the cordwinder that needs replaced and it's cheaper to let them fix it in the first place than to take it apart and not be able to put it together again.
To find a shop near you, simply follow the directions on the following site.

http://www.aerushome.com/storelocator/

Oct 16, 2010 | Electrolux C101 Bagged Canister Vacuum

2 Answers

Auto rewind for the electrolux oxygen 3 ultra


HI
If this isnt working correctly, take it back. It wont get better

Feb 20, 2009 | Electrolux EL7020A Oxygen 3 Ultra Canister...

1 Answer

Power cord will not retract


Your cordwinder is broken take it to your local Aerus Electrolux dealer. If you have any additional problems call Liz at 570-326-1731

Dec 01, 2007 | Electrolux Guardian Bagged Canister Vacuum

5 Answers

Electrolux Lux 7000 retractable power cord


The trim pieces along the sides just pull off seperating the two housings. The back portion where the retract drum is is held by two plastic tangs on top inside. use a screwdriver to pry the ring down to dislodge the tangs. the bottom part will lift off. remove the front part using two screws just below the hinge. the retract has a long coil spring wound around a free spinning hub. there are two "tangs" inside that engage a ratchet-pawl assembly. you'll need to rotate the drum to rewind the spring onto its hub.

Jun 06, 2007 | Electrolux Lux 7000 Bagged Canister Vacuum

Not finding what you are looking for?
Electrolux UltraLux 2000 Bagged Canister Vacuum Logo

559 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrolux Vacuums Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Chris Nomland
Chris Nomland

Level 2 Expert

124 Answers

gggg

Level 3 Expert

904 Answers

Are you an Electrolux Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...