Questions & Answers for: replace rewind

...rewind working but it still stops before reaching the beginning of the tape. Coincidently I have a Bush machine with the same symptoms. the clutch gear needs to be replaced . you can order the part ...

...the left [ take up or rewind ] & right [ play\record ] assemble. VERY diffiult to repair if u don't know what u are doing. 3rd. Find & REplace EVERY rubber band that u find in the

rewind suddenly only takes up about 2/3rds of the cord. I tried pulling the cord all the way out to the extreme and rewinding again, but it looses spring power with about 2/3 left. May have to replace

...rewind to play back what I recorded Do you still have the remote control? Try with the remote. If this works, the button of the camera is broken and have to be replace by a qualified technician. Good ...

rewind don't work Hi I have a polan 2050 chain saw, and I replaced the rope fofr the rewind. So I put it back together and I pulled on it to start. and when the rope comes to the end it does not ...

...replace auto rewind button on a Hoover Canister Vacuum Model 116-2041080. How do you remove the top cover to get to the Auto-rewind button. 116-...... usually indicates a Sears/ Kenmore model vac ...

rewind coil on it.do not use it not to make the other rewinded coil on system will be burned.Replace the armature,or you find a shop which have an specialist in rewinding electrical motor works..if it

it will rewind for 5 seconds, can anybody tell me if this can be fixed. Thanks mike hi, you need to replaced idler wheel and all belt in the mechanism. hope that will help regards Alan

rewind a motor, and small motors are hardest. Look on the motor tag- you should see RPM, HP and Frame Size. These are the three things you need to know to replace the motor. If the shaft is odd, as it

I have a GE Slimline One Way Rewinder (Model #85201) . The belt has broken. Where can I buy a replacement belt for this unit? You can buy it from any electronic spare part selling shops.