Questions & Answers for: vacuum cord rewind

rewind suddenly only takes up about 2/3rds of the cord. I tried pulling the cord all the way out to the extreme and rewinding again, but it looses spring power with about 2/3 left. May have to replace

...vacuum...cord does not rewind The electric cord on my hoover s3639 does not wind back. Is there an easy way to fix it? If I have to open the body of the vacuum cleaner to do that, how do I open it? ...

cord rewind was very slow at first. I turned off the machine, unplugged the cord, and then stepped on the canister handle to activate the rewind feature. Now the cord doesn't rewind at all. It's as if

...vacuum cord will not rewind it is pulled all the way out need to disassemble need to disassemble to repair cord rewind This rewind is not easy to work on, I rewound my Eureka with much persistance. ...

...The power cord reel does not rewind the cord on my Kenmore canister vacuum Model # 116.235.12. sounds like the spring is either over stretched or broken. you may have to have the spring ...

...cord in the rewind spring is off track and the spring and spool will need to be reset by opening the vac. If the cord will not budge either way , by now it has likely begun to twist and tangle.With ...

...vacuum it tok me an hour to pull it apart and back together. now i have done a dozen or so it is about a 30minute operation. I dont know what you rate your technical skill level at but i give this ...

...by Miele. There IS a fix to the cord rewind, unless your model falls within the 5 year warranty. In which case contact your nearest Miele dealer for a replacement to the cord rewinder. Good

...sure but if you can get into the rewinder you can free up the cord it should go, hope this helps. Chris there is a recall on this

how to rewind the power cord assemble? The only way to rewind the cord assembly is to take the cord real out of the vacuum and rewind it and put it back in. There is no easy way to do it