After i refilled my ink.. i can't print, scan and copy. error code 2 114 0 always appeared.
I got a same prob..i can't print,scan and copy and the refill warning always appeared..i hv refill the cartridge and i shut it down and try again and again..it's the cartridge prob or the printer prob..?
I on my printer cannon Mp198 and have an E, 2,7.... but i'll try to reset it but not it's work, what will i do? pls. help meeeeee....
How can i operate my scanner always says that "cannot communicate with the scanner cable may be disconnected or scanner may be turn off. check the status scanner driver will be close" how will i fix these problem?
i check all the cable and on the scanner but still cant scan a docs..
×
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response
Thanks, Joe
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309
10,071 views
Usually answered in minutes!
Hi, You need to reset your device for that follow these steps. Steps:- 1) On the operator panel, press the ON button. (The display will go blank.) Note:- You need to unplug the power cord if ON button does not shutoff the device. 2) Wait approximately ten seconds and then press the ON button again. 3) Wait until the device has completed its cycling process before submitting another job request. Note:- You need to unplug the power cord and retry if the above step do not clear the error. Good luck...do rate the solution.
×