When i power the computer i receive "error 17" message

You need to let the Magnavox know what signal it should be displaying. Look for a "Source" button on the remote or menu and choose PC or whichever slot you are hooked up, say HDMI.

Typical Error Messages from this head unit:

• ERROR: 11,12,17,30 / Cause: Dirty Disc /Action: Clean Disc
• ERROR: 11,12,17,30 / Cause: Scatched Disc / Action: Repace Disc
• ERROR: 10,11,12,15,17,30 / Cause: Electical or mechanical / Action: Turn the ignition ON and OFF, or switch to a different source, then back to the CD player

Try a CD Head cleaner, that should resolve this error.

The message says that the monitor doesn't receives signal - which is normal. Since the problem appears only after you plug in the cable in means that the problem is located there - something is wrong with your pc, most likely the video card has died.

Hi there,
I found the following information on Page 28 of the Pioneer manual for your DEH-P2900MP through the pioneer website:

http://www.pioneerelectronics.com/pio/pe/images/portal/cit_11221/370967683DEHP2900MPOperationManual1027.pdf

-----------------------------------------------------
ERROR-11, 12,
17, 30
Dirty disc Clean disc.

ERROR-11, 12,
17, 30
Scratched disc Replace disc.

ERROR-10, 11,
12, 15, 17, 30,
A0
Electrical or me-
chanical
Turn the ignition
ON and OFF, or
switch to a differ-
ent source, then
back to the CD
player.

-----------------------------------

I hope that helps

Check the power cable or swap it with another for testing purposes,check the pc's power supply and make sure it is delivering power to the monitor, use a multimeter and set it to V voltage to do the testing.Also the power supply inside the monitor may be faulty or bad, power outtages can do that.

ERROR-11, 12, 17, 30 Dirty disc Clean disc.
ERROR-11, 12, 17, 30 Scratched disc Replace disc.
ERROR-10, 11, 12, 15, 17,
30, A0
Electrical or mechanical Turn the ignition ON and OFF, or switch
to a different source, then back to the CD

did you try installing newest drivers from intel/gigabyte website? what you described looks to me as a overheating problem. try running the game with case open. are you running on the integrated GMA graphics or PCI-E graphics card(like geforce, radeon)?

Hi! Error 388 means the local machine has originated a fax session and detected a remote fax machine but has been unable to detect any T30 frames.
If the machine is in V.17 mode, it is likely the connection has been interrupted. In V.34 mode is also possible for this error to occur due to compatibility problems with certain machines and/or line conditions.

Solution:

1. Reattempt the fax transmission at a different time when telephone line conditions have improved.

2. Disable V.34 on the local machine and attempt the transmission using the V.17 mode. ( See error 227 for changing to a slower speed or disabling V.34 .)

Use the link below-

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=1153695&prodTypeId=18972&prodSeriesId=1153695&objectID=buu02549

this problem is regarding windows file.
check this website..and download the dll...
http://www.dll-files.com/

I'm using also smslib and nokia 6020 phone for sending and receiving SMS, but i've some trouble with reading messages, would you please tell me the configuration for the modem, i used this one :
ModemGateway gateway = new ModemGateway("modem.com4", "COM4", 4800, "Nokia", "Nokia 6020", srv.getLogger());