At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
When "add water" comes on I add water without removing the water resivor. Once water is added the wording changes to "prime" I have to remove the water resivor and then it will work. How do I fix this.When "add water" comes on I add water without removing the water resivor. Once water is added the wording changes to "prime" I have to remove the water resivor and then it will work. How do I fix this.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If your coolants color is pink you must add coolant that is pink. If it is green you must add green. You CANNOT mix green and pink together. You can get 50/50 mix which is half coolant and half water which is ready to use. You can also get coolant that does not have water added to it but you will still need to add water. This is usually better for your buck.
Hello,
This will require an opening of the coffee maker appliance, the themostat could be the problem because
the themostat send current to the element of the coffee maker.
Try to check the element and also check the fuse of the coffee maker.....
If your coolant level is dropping, I would suggest that you take a good look at the water pump. That is a very common coolant leakage probelm area on your vehicle. I change 2-3 a week.
Hope this helps.
Please contact the service center and speak to Steve at:
Electra-Craft
41 Woodbine St
Bergenfield NJ 07621
phone 201-439-1700 Steve [email protected] www.electra-craft.com
Your inlet valve at behind top of machine is defective; or the pressure from your faucet is insufficient.
Close your faucet valve on wall & unscrew your hoses to check screens on hoses & machine. Clean out well. See that the water pressure is good. Refit, check for leaks. If this is not the problem change your inlet valve, it is easily done. Sites for spares: RepairClinic.com (which is good) espares.co.uk AppliancePartsPros.com
When "add water" comes on I add water without removing the water resivor. Once water is added the wording changes to "prime" I have to remove the water resivor and then it will work. How do I fix this.
×