What kind of tubes can be used? (5 ml, 15 ml, 50 ml...?)

Moved category from Car and Trucks

Contact the maker direct for local or factory service options.

Operating Manual for Small Centrifuge Z 206 A - HERMLE ...

https://www.hermle-labortechnik.de > download
PDF
Hermle Labortechnik GmbH. Z206A_V2.18_eng ... The centrifuge is powered by a maintenance-free brush motor. ... Model Z 206 A is supplied in a carton.

• 
  

  CENTRIFUGES AND ACCESSORIES - HERMLE Labortechnik

  https://www.hermle-labortechnik.de > download
  PDF
  For larger volumes, a fixed-angle rotor for 6 x 50 ml tubes (conical and round bottom) is also available. 306.00 V01 - Z 206 A, 230 V / 50 - 60 Hz / 100 W.

Converting MG to ML will vary depending upon the density. It is not possible to know how many MG equal ML because milligrams are used to measure weight and milliliters are used to measure volume. You would need to know the density of the item that is being measured.

Converting MG to ML will vary depending upon the density. It is not possible to know how many MG equal ML because milligrams are used to measure weight and milliliters are used to measure volume. You would need to know the density of the item that is being measured...

Do you have a biomedical group in your facility or somebody who's responsible for maintaining your equipment? If you do, they should have a photo-tachometer. They can place a piece of reflective tape onto the rotor to get you the true rpm speed. You probably need an accurate speed anyway to ensure proper rcf for your samples.

manuals:https://www.medwrench.com/equipment/1774/thermo-fisher-scientific-shandon-cryotome-fe-and-fse

Wikipedia says: A centrifuge is a piece of equipment, generally driven by an electric motor (some older models were spun by hand), that puts an object in rotation around a fixed axis, applying a force perpendicular to the axis. A centrifuge is also used to separate the components of blood in blood banks.The centrifuge works using the sedimentation principle, where the centripetal acceleration causes denser substances to separate out along the radial direction (the bottom of the tube). By the same token lighter objects will tend to move to the top (of the tube; in the rotating picture, move to the centre).

A number of companies specialize in calibration and repair of centrifuges. There are also sources of replacement parts. Such sources may have access to the repair manuals or user guides. Or, their technical support may offer a more direct answer to your issue with a centrifuge. That said, outside of these materials outside of the hands of factory trained technicians is highly likely elusive. You might try www.researchgate.net.

https://www.rpiparts.com/PartsList.aspx?model=290

https://www.machinetools.com/en/models/sorvall-rc-2b

https://www.ebay.com/itm/234589481049?var=0&mkevt=1&mkcid=1&mkrid=711-53200-19255-0&campid=5338590836&toolid=10044&customid=c21edfb1a6fb10c47675bb0cf055db30

Thermo Fisher Scientific might have more information regarding the device. I do not find published schematics for it on the web.

https://www.manualslib.com/manual/1937197/Thermo-Scientific-Sorvall-Rc-5c-Plus.html

https://www.medwrench.com/thread/130438/fault-7

https://www.scribd.com/document/443158196/sorvall-rc5c-rc-5c-and-rc-5-plus-service-manual#

No. The ML-L3 works with many but not all Nikon DSLRs. It does not work with the D3100. The D3100 uses the MC-DC2 remote cord.

The manufacturer's recommendations are usually posted under hood or on the drivers side door by the latch. 10-40 is pretty thin and I would bet that 5-30 or 5-40 would work best.