On my Janome 200E i have 6 files each with a lile that goes to a verse, how can i embroidery these so they line up and even spacing on the left side

Likely there's a size limit to the USB memory stick. It doesn't say in the 200E manual but a search on "usb stick" on the Janome site would indicate some earlier USB capable machines may have a 2GB limit.

See "Z". Apparently there are two spaces with Z.

https://www.janome.com/en/products/software/

You would have better luck searching on facebook to find this out. You can also check on yahoo groups by searching groups for that model of sewing machine. Good Luck

Can only use the code for each and search individually

You need a view program to see stitch files as images. Viking has one at this link.
http://new.husqvarnaviking.com/en-CA/Software/6D-Explorer-Plug-in

Sounds like a usb port problem. Try another usb stick first.

for embroidery the tension needs to be quite loose

High Shank Machines are all the Janome Embroidery models MC 8000, MC 9000, 10000, 10001, 11000, 200E, 300E, 350E....etc
If yours is not an embroidery machine, it has a LOW SHANK .....the higher shank allows for easier access for the embroidery hoop

Bargain Box

High Shank Machines are all the Janome Embroidery models MC 8000, MC 9000, 10000, 10001, 11000, 200E, 300E, 350E....etc
If yours is not an embroidery machine, it has a LOW SHANK .....the higher shank allows for easier access for the embroidery hoop.