Why does my screen go black while recording on bandicam game mode with a face cam.

its a faulty camera or cable attached to it

my samsung vpd230 has stoped recording, just a black screen,
would you also explain what a ccp is,also the words memory stick keeps keeps appearing.thankyou

i am not sure that i solved that problem but last night i was trying to solve this problem , there was a lamp close to me . i focus the lam and zoom in and zoom out the handy cam. i was wonder that it works great. but i am still not satisfied because i dont know what is the problem ? and it can be happpened again. If somebody really knows this problem kindly tell me . i appriciated.
/

I have a brand new VP-D31. It still has the protector on the screen. I acquired this (legally!) but it has no charger,cables, battery or any etcs. I got it from the Police Auctions and was too ignorant to understand what I was getting. The item was obviously stolen from a store shelf - hence no bits. How about you buy it from me?

dont ever buy sony again! Problem solved

i think you have changed the screen into other mode so that you are unable to see the recording picture there will be a switch to change the mode at the back of the cam or at the right of the cam.

Title :Canon ZR 60 Black Screen in Record mode


Question : Can Canon Repair this defect ??


I have found several other people with the same problem Canon ZR60 won't record ,only get a black screen ,only a few years old with less than 75 hours use .Can this be fixed free from Canon .


[email protected]


Goce
MAKEDONIJA

You can see an image in a camcorder viewfinder any time the camera's actually on in record mode, whether or not the camcorder is actually recording. So that's no guarantee.

Assuming the obvious (you have the right kind of tapes, they're not in write-protect mode, you rewind before playing, etc). I recommend that you borrow a tape of the same kind from someone else and check it on playback in your camcorder. This should lead you know understand if you have a playback problem or a recording problem.

This sounds like the CCD sensor is faulty ( this is the device that generates picture in both v-cams and normal digital cameras and sits behind the lens ). Playback is fine but no image ( or very 'noisy' image ) in capture mode. Easy to repair but one has to put a new CCD block in.

Fixed it, at least temporarily I had the side off my trv250 examining it, especially the CCD connection. I had read the post about soldering a capacitor to pins 1 and 3 (from the left) on the bottom row. I didn't have the specific capacitor on hand, but I started touching some of the small ones I did have to those pins. I found that after I touched a 100uF, 10V cap to pins 1 and 3 the picture suddenly came back to life and stayed that way after removing the cap. I have no idea how long this will last, and I've set up the cam on a tripod in the livingroom with the LCD display facing me so I can monitor it. If you, like me, figure you have nothing else to lose, you might want to give this a try. Note: my camera was suffering from the green smeary horizontal lines problem, and wasn't completely black. I'm not sure if this makes a difference or not.