I can not find a place to log into my chart - Computers & Internet

Assume u talking about auto gamma adjustment...

<Procedure>
(1) While pressing [0] and [5] simultaneously, turn the power ON.
?
Adjustment Mode
(2) [SETTINGS]
?
[USER FUNCTIONS]
?
Select [DRAWER]
?
Select [DRAWER1]
?
Set the paper size to A4/LT.
?
[OK]
?
Set A4/LT for the paper in upper drawer.
(3) [CANCEL]
?
[CANCEL]
?
[SETTINGS] (Return to code entry screen.)
?
[10]
?
[SETTINGS]
?
[START] (A gamma adjustment
patch chart is printed out.)
(4) Place the patch chart for adjustment printed in st
ep (3) face down on the original glass. Place the
chart aligning its black side of the gradation pattern against the original scale.
(5) Key in a code "7165" and press the [START] button.
(6) If process finishes successfully, select "Yes" and
press the [OK] button to apply the adjustments.

please be more specific, when you say a "chart", do you mean a graphic chart?

(1)While pressing [0] and [5] simultaneously, turn the power ON. ? Adjustment Mode
(2) [SETTINGS] ? [USER FUNCTIONS] ? Select [DRAWER] ? Select [DRAWER1] ? Set the paper size to A4/LT. ? [OK] ? Set A4/LT for the paper in upper drawer.
(3) [CANCEL] ? [CANCEL] ? [SETTINGS] (Return to code entry screen.)
? [10]? [SETTINGS]? [START] (A gamma adjustment patch chart is printed out.)
(4)Place the patch chart for adjustment printed in step (3) face down on the original glass. Place the chart aligning its black side of the gradation pattern against the original scale.
(5)Key in a code "7165" and press the [START] button.
(6)If process finishes successfully, select "Yes" and press the [OK] button to apply the adjustments. (To cancel the reflection of adjustment results, press the [CANCEL] button.) In the case of an abnormal ending, "Error" is shown.
Press the [CANCEL] button to clear the error display. Next, confirm that the patch chart is oriented correctly on the platen and not at an angle, then do the process from step (4) again.
(7)Press [20] ? Press [SETTINGS] ? Press [START].
Notes:
•Compare with chart output in step (3), there should be no differences in patterns and no faint colors.
(8)Place the patch chart for adjustment printed in step (7) face down on the original glass. Place the chart aligning its black side of the gradation pattern against the original scale.
(9)Key in a code "7167" and press the [START] button.
(10)If process finishes successfully, select "Yes" and press the [OK] button to apply the adjustments. (To cancel the reflection of adjustment results, press the [CANCEL] button.)
In the case of an abnormal ending, "Error" is shown. Press the [CANCEL] button to clear the error display. Next, confirm that the patch chart is oriented correctly on the platen and not at an angle, then do the process from step (9) again.
(11)Turn the power OFF.

In the search bar of you browser, type in images of Place value charts. Launch the search and follow some of the links.

It happens when you're Internet is so slow.

dont check "sign in as invisible" at log in

when u are connected through your messenger and you open your inbox, with the kind of features yahoo has now, it will automatically sign you-in, in your inbox, (but since you can only chart one at a time with your id), and automatically log you off from your messenger. if you try to sign in back, it will then log you from your inbox chart. it is now left for you to choose the one you wish to chart with.

Make sure your time offset is correct and also make sure you have not accidentally offset the chart. Also keep in mind that there are places in the charts that you can overzoom which can also cause this problem.

I think you have a C- Map card (black colour)clean the contacts with a contactcleaner if it not works try the card somewhere else
The C-Map card have problems that they work for a while and than stops inside the card a some memorychips and they losing contact

Email me at [email protected] and I will send you the pics.