How to fix the problem of canon printer, which brings a message that could not start setup under the current enviroment. Check the the start condition of setup

The error message "Could not start up under the current environment" typically indicates that the driver you are trying to install is not compatible with your current operating system or system configuration. To resolve this issue, you can try the following steps:
1. Check System Requirements: Ensure that you meet the minimum system requirements specified by the Canon driver for your operating system. Check the driver's documentation or the manufacturer's website for compatibility information.
2. Verify Driver Version: Confirm that you have downloaded the correct driver version for your Canon photocopy and printer model. Drivers are specific to each printer model and may vary. Ensure that you have selected the correct driver for your exact model number.
3. Run Compatibility Troubleshooter: Right-click on the driver installation file and select "Properties." Navigate to the "Compatibility" tab and click on "Run compatibility troubleshooter." Follow the on-screen instructions to let Windows automatically detect and apply compatible settings for the driver installation.
4. Update Operating System: Make sure your operating system is up to date with the latest patches and updates. Sometimes, newer drivers require specific updates to be installed on your system. Check for updates using the built-in Windows Update feature or the update utility for your specific operating system.
5. Disable Antivirus/Firewall: Temporarily disable any antivirus or firewall software running on your system. Sometimes, security software can interfere with driver installations. Once disabled, attempt to install the driver again and see if the error persists.
6. Contact Canon Support: If the above steps do not resolve the issue, it is recommended to contact Canon's technical support for further assistance. They can provide you with specific troubleshooting steps or alternative driver options based on your printer model and operating system.
Remember to download drivers only from official Canon sources or reputable websites to ensure their authenticity and avoid potential security risks.

If your enpapp.exe error is related to a specific program, reinstalling Epson Connect Printer Setup-related software could be the answer.
Instructions for Windows 7 and Windows Vista:

1. Open Programs and Features by clicking the Start button.
2. Click Control Panel on the right side menu.
3. Click Programs.
4. Click Programs and Features.
5. Locate enpapp.exe-associated program (eg. Epson Connect Printer Setup) under the Name column.
6. Click on the Epson Connect Printer Setup-associated entry.
7. Click the Uninstall button on the top menu ribbon.
8. Follow the on-screen directions to complete the uninstallation of your enpapp.exe-associated program.

Instructions for Windows XP:

1. Open Programs and Features by clicking the Start button.
2. Click Control Panel.
3. Click Add or Remove Programs.
4. Locate enpapp.exe-associated program (eg. Epson Connect Printer Setup) under the list of Currently Installed Programs.
5. Click on the Epson Connect Printer Setup-associated entry.
6. Click the Remove button on the right side.
7. Follow the on-screen directions to complete the uninstallation of your enpapp.exe-associated program.

Instructions for Windows 8:

1. Hover the cursor in the bottom left of the screen to produce the Start Menu image.
2. Right-Click to bring up the Start Context Menu.
3. Click Programs and Features.
4. Locate enpapp.exe-associated program (eg. Epson Connect Printer Setup) under the Name column.
5. Click on the Epson Connect Printer Setup-associated entry.
6. Click the Uninstall/Change on the top menu ribbon.
7. Follow the on-screen directions to complete the uninstallation of your enpapp.exe-associated program.

After you have successfully uninstalled your enpapp.exe-associated program (eg. Epson Connect Printer Setup), reinstall the program according to the SEIKO EPSON Corporation instructions.

The driver set you have is not suitable for the operating system you are using, OR you have a system configuration that does meet the minimum requirements for the printer. You may need to contact Canon to resolve your problem.

Make certain you have the current updated drivers for the printer. Check to see if the printer is recognized as one of the devices active and available. If its wireless, be certain the communication is both ways. Do a printer test of the Wireless transmission phase. If you connect directly by Cat5/6 cable with Ethernet, check drivers. Check cables. Check for a positive connection on both ports, Computer and Printer. Make certain the printer listed is the Main Printer when you do a setup.

Just wild guess: arey ou using a compatible operating system with the driver of your printer?

In most cases the printer driver software can have errors while being in use or is shut down. So to reset remove your printer from the PC and uninstall the printer software. Now reinstall the printer software and then connect the Printer ONLY WHEN PROMPTED, to be detected as a new hardware as it will be installed. Now check the printer properties to see the ink levels.
Activate head cleaning before a test is taken.

Could not start setup under the current environment

The error E007, is a common error for digital copiers, B&W segment.It means that fixing film on fixing heater is worn out.To be exact: on left side of fixing film on heater is little white square.With help of this square, photo sensor knows the condition of fixing film.If this square is "eaten", the sensor does not recognize it and automatically reports error code E007.

Your next step should be to replace fixing film. For EU region, or 230V and 50Hz current, the part number is FM2-3353 FIXING FILM ASSY.

In case of mild worn fixing film, you can try to turn off and on the copier, and get few more copies.

If the copier has over than 500 000 copies, the best solution would be to replace the whole fixing unit.
For EU region, the part number is FM2-3352.

The condition of fixing film you can check with pocket mirror and flash light.
Open the left door, above the drum unit (long green roller) is fixing unit which have warning heat lable.Place the pocket mirror under left side of fixing unit, and you should be able to see the damadged fixing film.Also if the fixing is so badly eaten, on left door should be particles of light brown color.

But however, you should replace the fixing film.

Ink not made for your printer has risks. 20 years as Canon rep taught me this. Yields: are affected by resolution, type of paper, condition of print head, condition of ink jets, all ink jets and lasers are mfg'd under lisence to Canon. You have the best! Anytime supplies are cheaper, something is left out. used cartridges usualy leak air and drip ink ck for stains under print head. cartridge has used blotter also drips. Cheaper cartridges contain less ink, no free lunch. Fill it yourself 1 or 2 times and do it right. Put the printer in your shower for twenty minutes if you see excess leaked ink. Allow to air dry for a few days then install new cartridges. Run all the Nozzle checks and print head utilities. Touch nothing else on the inside. This will fix it or f@#%k it up for good

plz check the link below
http://www.fixyourownprinter.com/forums/inkjet/50418#1