Why will my generator shutoff after afew minutes after plugging in my 5th wheel

Hopefully you will find what you require here; https://www.irv2.com/forums/f107/avion-wiring-diagrams-189245.html

Not to worry friend, when my car go sick i avoided going to mechanic looking for DIY_Repair when I found this website https://big-manuals.com/ and this book helped me repair it within an hour, all by myself!!!
From wiring diagrams, schematic illustrati ons, spark plugs info, parts info, chassis number, valve time settings, step wise instructions, torque specs, error/fault codes, engine info, to every single minute parts, you get everything in there you can't imagine how detailed it is

It to small needs to be 3500 or better that compress on ac pulls a lot of ampege wen it kicks on

CHECK BATTERY, AND SOLENOID FIRST

Go to settings then playback and then volume limit. You can then use the click wheel to select the volume limit once you have the volume you want use the centre button to set, Hope this helps.

try pulling the ipod out of the dock while both are turned on or unpluggin and re-plugging the adapter... works for me

To reset an iPod with a Click Wheel, including:

• iPod nano (3rd generation)
• iPod classic
• iPod (5th generation)
• iPod nano (2nd generation)
• iPod nano
• iPod with color display (iPod photo)
• iPod (Click Wheel)
• iPod mini
• iPod mini (2nd generation)

1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
   
2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 8 seconds. You may need to repeat this step.

Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.

To reset an iPod with a Click Wheel, including:

• iPod nano (3rd generation)
• iPod classic
• iPod (5th generation)
• iPod nano (2nd generation)
• iPod nano
• iPod with color display (iPod photo)
• iPod (Click Wheel)
• iPod mini
• iPod mini (2nd generation)

1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
   
2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 8 seconds. You may need to repeat this step.

Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.

To reset an iPod with a Click Wheel, including:

• iPod nano (3rd generation)
• iPod classic
• iPod (5th generation)
• iPod nano (2nd generation)
• iPod nano
• iPod with color display (iPod photo)
• iPod (Click Wheel)
• iPod mini
• iPod mini (2nd generation)

1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
   
2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 8 seconds. You may need to repeat this step.

Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.

To reset an iPod with a Click Wheel, including:

• iPod nano (3rd generation)
• iPod classic
• iPod (5th generation)
• iPod nano (2nd generation)
• iPod nano
• iPod with color display (iPod photo)
• iPod (Click Wheel)
• iPod mini
• iPod mini (2nd generation)

1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
   
2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 8 seconds. You may need to repeat this step.

Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.