Sony Ericsson K800i Cellular Phone Logo
f
frank odelli Posted on Dec 13, 2014
Answered

I removed battery before off cycle finished,,,now it wont turn on ???

Just asked around

Answer This Question

1 Answer

jamie thompson

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

  • Contributor 2 Answers
  • Posted on Dec 13, 2014
jamie thompson
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.

Joined: Dec 28, 2012
Answers
2
Questions
0
Helped
994
Points
4

The easiest thing to do is look at the terminals gold plated on the battery and quickly lick them and immediately replace the battery and back cover and it will now turn on! I know it sounds funny but the saliva has some acid in it that allows better connection between the battery terminals and the phone terminals!

Testimonial: "ive found out by removing the battery before the mobile had properly turned off..it has affected the processor in the mobile."

  • jamie thompson Dec 13, 2014

    It sounds to me that you did this on purpose! I dont believe this is the problem but if it is at least you know what you did wrong and wont do it again! If you want proper answers to your questions you need to give more info, is the phone old or new is the battery old or new?

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My Bosch dishwasher Model #SHX4APO5UC/06 wont finish the cycle and it wont drain. We have checked hoses and they are not clogged. Is it something with the control panel?
Check your motherboard for burnt contacts. Easy to remove in the door. If you able resolder and give it a try. Cheaper then a new mother board.
Read full answer
Aug 11, 2014 • Bosch Dishwashers
0helpful
1answer

Whirlpool wont stop awm5125
replace control board
Read full answer
Jan 07, 2014 • Whirlpool AWM5145/2 Front Load Washer
0helpful
1answer

My washer is making a humming noise and will not run. there are currently clothes and water in the washer
remove 4 screws on the rear panel and then remove the cover, you can see the drain pump remove both hoses on the pump,it is probably plugged up,if it is they wont drain or do anything
Read full answer
Apr 30, 2012 • Maytag MAH6700AWW Neptune Front-Load...
0helpful
1answer

Wont finish wash and drain
I would turn off main power then open the controls looking for any burn parts on the power board before calling any one , how ld is this unit before yu spen too much get back to me
Read full answer
Dec 04, 2011 • Electrolux Dishwashers
0helpful
1answer

I have a high efficiency maytag washer. I interrupted the cycle before it was finished in the rinse and spin and now it wont work properly.l tried to get it to just spin again, but it wanted to fill with...
Thanks for choosing FixYa and welcome to the site. Looking at what you said, I would advise you to make sure that the timing is set correct. You want to make sure it is on cycle one. You can try to unplug it and see if that will reset it correctly. The timing may be stuck in spin cycle. The switch may be defective. If you have any questions, feel free to ask.
Read full answer
Apr 10, 2011 • Washing Machines
4helpful
1answer

Wont finish cycle there is a F code
Remove the bottom panel.a6ecc58.jpg The tech sheet with fault codes and diagnostics is behind the motor control unit,white box to left.448bb9b.jpg Clean out the pump filter and housing,7d13dce.jpg maybe that will helpc654f05.jpg

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Read full answer
May 21, 2010 • Whirlpool Duet GHW9150P Front Load Washer
0helpful
1answer

Put clothes in washer HOTPOINT modelWML730 started
TURN MACHINE ON TO FINISH CYCLE THEN RE WASH WITH SOAP ETCH,DOOR WILL NOT OPEN MID CYCLE SAFTY LATCH,YOU CAN TURN PROGRAM TO FINAL SPIN TO EMPTY MACHINE AND FINISH PROGRAM THEN DOOR WILL OPEN
Read full answer
Jan 06, 2010 • Washing Machines
0helpful
1answer

I turned computer off, it was installing updates and before it had finished i turned it back on. it has froze on installing updates and wont do anything.
remove battery pack, press and hold button for 5 seconds, put battery back in and restart.
Read full answer
Nov 12, 2009 • Compaq Presario C700T Notebook
0helpful
2answers

1996 gmc suburban wants to turn over but wont
could be an ignition or the computer
Read full answer
Jan 16, 2009 • 1996 GMC Suburban
0helpful
1answer

Washer wont complete cycle. its full of water and I cant drain it
if this a manuel timer,,you either stripped the ,,knob,,or you broke the timer its self...make sure that timer can be pushed and pulled,, pull ----on push is off
Read full answer
Nov 30, 2008 • Kenmore 24902 Top Load Washer
Not finding what you are looking for?

View Most Popular

K800i Cellular Phone

  • Cell Phones

Related Question

My Bosch dishwasher Model #SHX4APO5UC/06 wont finish the cycle and it wont drain. We have checked hoses and they are not clogged. Is it something with the control panel?

  • Bosch Dishwashers

Related Topics

50 views

Ask a Question

Usually answered in minutes!

Popular Questions

Sony Ericson k800i Free unlocking code

Sony Ericsson K800i Cellular Phone

Forgotten My Phone Lock Code

Sony Ericsson K800i Cellular Phone

How can i format sony ericsson k800i

Sony Ericsson K800i Cellular Phone

Unlocking Sony Ericsson Z310a

Sony Ericsson K800i Cellular Phone

Sony ericsson k800i wont turn on.

Sony Ericsson K800i Cellular Phone

Popular Holiday Gifts Report
Popular Holiday Gifts Report

View all Fixya Reports

Top Sony Ericsson Cell Phones Experts

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Kolbrun...

Level 3 Expert

1228 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Sony Ericsson Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. K800i Cellular Phone Manual

K800i Cellular Phone

Loading...