How do you make a conference call from a vetch sect 6.0 phone?

Press the VOL ( 6 or 5) button on the handset to select ENGLISH, FRANCAIS, or. ESPANOL. The default is "ENGLISH". 4. Press the Select/Save button.

http://telecom.hellodirect.com/eBiz/pdf/phones/RCA_H5401.pdf


Page 12 of free manual at the link above.

try this link might help you.
How can you program uniden phone to vtech dect 6 0 Google Search ..
or this one.
uniden phone to vtech dect 6 0 manual Google Search

check settings and switch off fax mode

type in u tube How to make conference call in panasonic kx tg786 1e and the video will show you

Your VSX 6000 does not support Multipoint. YOu will have to move up to the VSX 7000 or 8000. The VSX 7000 supports MP and the VSX 8000 supports 6 site mp if you have that option installed. DAVID

Some cell phones don't mute, but a *6 will mute your phone to the conference call center, and #6 will unmute if you wish to say something. This will not mute your phone, so when you hang up...you're always good to go to make calls. It only mutes a phone (any phone) to the server conducting the conference.

Conference [Feature] [3]

• Establish a conference call between yourself and two other parties.

1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call

• To split a conference:
• Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].

• To independently hold two calls:
• Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

Conference [Feature] [3]

• Establish a conference call between yourself and two other parties.

1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call

• To remove yourself from a conference permanently (unsupervised conference):

• Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)