I bought a KDL-32EX340 it was a display model got it home hooked up video game and dvd for my son the only inputs I can get to work is the RCA ....the HDMI & COMPONENT says no signal check your conections or try another input....is there a display mode that the store puts the tvs inor how do I fix this

No problem. But you did post a question for a TV in game consoles. Ebay has exactly what you need for cheap. Here is the link.
SONY KDL 32EX340 Power cord

IM GUESSING THIS MIGHT BE AN RCA TELEVISION? if you dont have an rca in hook up on the tv give up and buy a new tv or you can find an older item what it is is a switch that has an rca input and a coax output it was used to hook up the older video game systems it is still sold in most stores and that will work if you do have rca inputs and lost the remote you need to get a universal remote to switch the input on certain older rca tv's you could go to channel 00 and it would set it to the input with the switch you shoudl be able to use it by putting the tv on channel 3

I believe you have to enter 00, 90, or 91 to access the composite video inputs, buy an RCA universal remote.

This receiver has only one HDMI output, but 4 HDMI inputs. If some inputs don't work, try connecting the equipment (DVD for example) to HDMI input which works with other equipment....
For the RCA (composite) video input - it won't work, because this receiver don't have any video processing circuit.
So HDMI input video goes to HDMI outout connector.
Composite (RCA) video input goes to Composite outout and no other video output.
S-video input goes only to s-video output.

How to hookup TV

If you have a TV with only a single coax input and you want to hook up components like DVD players and VCRs, here's how to do it.



What you need to connect your DVD player or game players to a TV that only has a VHF/UHF 75-ohm F-connector ("coax antenna input").

1.) RF Modulator with Stereo Audio Inputs.



2.) 6 foot long coaxial cable with male "F" connectors. This cable goes from the modulator to the TV. The modulator also has a coaxial input to plug in your antenna or your VCR.



3.) 6 foot long Video and Audio Cables with "RCA" plugs. The cables connect the yellow, red and white outputs from your DVD or game player to the yellow, red and white inputs of the modulator.





Works with X-Box, PlayStation, Nintendo or other devices that output audio/video via the RCA plugs and you want to connect them to your coaxial only TV.

Hi there are different video selector boxes you can buy. here is an example:
http://www.thetwistergroup.com/store/customer/product.php?productid=40324%20X18195&source=fr
Eventually your going to have to consider upgrading home theater systems new systems have hdmi and hdmi upconversion so that you can plug everything into the stereo and then have one hdmi output going to the tv. is the rca connector the digital coax? you can usually tell by the color. this may be what you will want to use for audio. It really does get kind of complex.You may just not have enough inputs for everything. You definitely are limiting your hdmi use.
Hope this helps. If you have more questions let me know.
Thanks,
Lee

Go to Wal-Mart buy video adapter for video jacks to plug up dvd,game set then hook to TV.

I asume your game systems and dvd player are hooked up via the rca inputs.So all you would need to do is purchase a universal remote,program it for your tvand press ch00 which should be the video input.make sure your dvd or game system is on so you know if you are on the right channel

I too just bought an RCA remote for the same television. The button to access other video screens is the A/B button on mine (next to the last channel button).

I am assuming that you are using a surround sound system?If so on the back of the satellite receiver you will have RCA cables labled yellow ,red,white uuse an rca cable to run from the output on the back of the sat box to an rca input on the surround sound unit.the inputs should be labled on the back of the surround sound unit.once you have the sat box plugged in look for the output on the surround sound (rca cables) run one set of rca cables to the rca cable input of the Tv.on the original tv remote select the tv input that is the cable from the surround sound is plugged in to . make sure the surround sound unit input is selected to the input that the sat box is plugged into.this will give you surround sound from your satellite receiver,repeat with your DVD player plugging the DVD rca cable output to another empty input on the surround sound.to switch between the sat box (satellite TV) to DvD select another input on the surround sound unit.Try to correspond the units you are plugging into the surround sound to the correct name of the component on the back of the surround sound unit to avoid confussion.any questions,Im here to help.If this works rate me FIXYA! if it helps.GOOD LUCK!