Norstar phones compatible with NEC phone system

It's simple.

On Vmail it's Ftr 983 -> pswd -> 1 -> reinstall -> yes
On MICS it's pull the power plug off and within 15 minutes -> Ftr** -> startup -> pswd

To be sure follow the users manual instructions. You can get the pdf user manual here: Nortel Norstar pdf manual

A Nortel Key Service Unit, an ICS (MICS,CICS), BCM (50,100 etc), Norstar (308,616,824), an Avaya IP Office running Nortel cards, or there is another company that makes a Nortel emulation key system but I can't recall what it is right now.

Carl

If your phone system has 6.1 software or up then yes,the tech or vendor can program it for you. If you know how to program look under Config/Lines for Ring Type.

The Norstar System uses only 1 pair of wire for each telephone. So, use the White/Blue pair.

Would you expect a Nortel phone to work on an NEC sysem? The phone is digital and it requires an NEC system to work. Nortel M7208,7310, T7316 are phones that typically work on Nofrtel digital systems. They also require a digital port.

Carl

THe older norstar systems you had to go into programming to change time and on the newer systems press feature * time on your phone and follow the prompts. On the older systems go in to programming press feature ** 266344 (config) then pswd 23646 (admin) on your key pad this gets you into programming press next until you get to change time. You need an overlay which can with your phone system manual. If need more info please ask agian hope this helps.

While a call is ringing in, use the volume bar

Feature **time (type out time on the dialpad.)

CAN ANYONE TELL ME HOW TO CAHNGE THE GREETING ON MY M7310 NORSTAR PHONE

We would like to change the name displays on our phones